Aerosol filtration performance of nanofibrous mats produced via electrically assisted industrial-scale solution blowing

Creative Commons License

Gungor M., Toptas A., Calisir M. D., Kılıç A.

POLYMER ENGINEERING AND SCIENCE, vol.61, no.10, pp.2557-2566, 2021 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 61 Issue: 10
  • Publication Date: 2021
  • Doi Number: 10.1002/pen.25780
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, PASCAL, Aerospace Database, Applied Science & Technology Source, Biotechnology Research Abstracts, Chemical Abstracts Core, Chimica, Communication Abstracts, Compendex, Computer & Applied Sciences, INSPEC, Metadex, Civil Engineering Abstracts
  • Page Numbers: pp.2557-2566
  • Keywords: filtration, nanofiber, nanotechnology, polyamides, solution blowing, BICOMPONENT POLYMER NANOFIBERS, ULTRAFINE FIBERS, FILTERS, ELECTROSPUN, MORPHOLOGY, PARTICLES, DIAMETER, WEB
  • Recep Tayyip Erdoğan University Affiliated: Yes


Highly efficient polyamide 6 (PA6)-based nanofibrous air filter media was developed for particulate matter (PM) removal in the ambient atmosphere. The PA6 nanofibrous mats exhibited 85% PM0.3 capture performance at a cost of 164 Pa pressure drop when the multiple-nozzle solution blowing system was set to 8 m/h fabric winding speed. However, an increase in the winding speed at a constant feeding rate lowered the filtration efficiency to 62% due to the less amount of nanofibrous mats collected on the substrate. The application of electrical field at the same parameters allowed us to produce a filter media having FFP3-level filtration performance, which means 99% PM0.3 capture performance. This was attributed to a fine fiber diameter (116 nm), higher solidity value (0.149), and lower average pore size (2.28 mu m). These results show that the electrically assisted solution blowing provides a feasible route for the production of high-quality nanofibrous filter media.