First-principles investigation of the nano-optoelectronic and thermoelectric properties of cubic TaCu3S4 sulvanite


Khalil H. H., Ghebouli M., Fatmi M., Bouferrache K., Smerat A., YAYLACI M., ...Daha Fazla

Solid State Communications, cilt.418, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 418
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1016/j.ssc.2026.116616
  • Dergi Adı: Solid State Communications
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core, Chimica, Compendex, INSPEC, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO)
  • Anahtar Kelimeler: First-principles calculations, Nano-optoelectronics, Nanocoatings, Optical properties, Photovoltaic absorber, Sulvanite, TaCu3S4, Thermoelectric materials
  • Recep Tayyip Erdoğan Üniversitesi Adresli: Evet

Özet

Cubic sulvanite TaCu3S4 has recently attracted interest as a functional semiconductor for nanoscale optoelectronic, photovoltaic, and thermoelectric applications. In this work, we present a comprehensive first-principles investigation of the structural, electronic, phonon, optical, elastic, mechanical, thermoelectric, and thermodynamic properties of cubic TaCu3S4 in the P43m space group using the full-potential linearized augmented plane-wave method as implemented in the Wien2k code. Structural optimization based on the Birch–Murnaghan equation of state yields an equilibrium lattice constant of a = 5.5364 Å and a bulk modulus of B0 = 86.32 GPa, confirming the mechanical robustness of the sulvanite framework. The calculated cohesive energy of −0.85 eV/atom further confirms that the formation of crystalline TaCu3S4 from its isolated constituent atoms is energetically favorable. Phonon dispersion calculations show no imaginary frequencies, indicating the dynamical stability of the cubic phase. Electronic band-structure calculations performed using GGA-PBE and the modified Becke–Johnson potential reveal a direct semiconducting band gap at the Γ point, with values of 2.00 eV and 2.14 eV, respectively. Additional GGA + U calculations, performed using an effective Hubbard parameter of Ueff = 5.2 eV for the Cu 3d states, yield a band gap of 2.16 eV and confirm the semiconducting character of the compound. The close agreement between the GGA + U and mBJ values demonstrates the importance of properly describing the localized Cu 3d states. The mBJ band gap lies in the visible spectral range, making TaCu3S4 suitable for thin-film and nano-optoelectronic absorber applications. The calculated optical response demonstrates a sharp absorption onset near 2.14 eV, a static refractive index of approximately 2.33, and a high absorption coefficient exceeding 2.08 × 106 cm−1, indicating strong light-harvesting capability in nanoscale absorber layers. The predicted optical behavior is also qualitatively supported by the available experimental absorption and photoluminescence measurements reported for Cu3TaS4 nanocrystals. Elastic constants satisfy the Born stability criteria, while the calculated B/G ratio of 1.144 and Vickers hardness of about 18 GPa suggest a brittle but relatively hard material suitable for protective nanocoating applications. Thermoelectric transport calculations reveal large Seebeck coefficients near the band edges, reaching about 1600 μV/K at 300 K, together with favorable electronic transport features for energy-conversion applications. Quasi-harmonic thermodynamic simulations further confirm systematic and physically consistent variations of thermodynamic parameters over temperatures up to 1000 K and pressures up to 30 GPa. These results highlight cubic TaCu3S4 as a promising nanoscale functional semiconductor for thin-film photovoltaic absorbers, nano-optoelectronic devices, thermoelectric energy conversion, and protective nanocoating applications.