Flow field and heat transfer characteristics in an oblique slot jet impinging on a flat plate


Akansu Y. E. , SARIOĞLU M., Kuvvet K. , Yavuz T.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, cilt.35, ss.873-880, 2008 (SCI İndekslerine Giren Dergi) identifier identifier

  • Cilt numarası: 35 Konu: 7
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1016/j.icheatmasstransfer.2008.03.005
  • Dergi Adı: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
  • Sayfa Sayıları: ss.873-880

Özet

An experimental study was performed to determine the effects of inclination of an impinging two dimensional slot jet on the heat transfer from a flat plate. Local Nusselt numbers and surface pressure distributions were determined depending on inclination angle, jet-to-plate spacing and Reynolds number. The results showed that the location of maximum heat transfer was mainly due to the angle of inclination. As the inclination angle increases, the location of the maximum heat transfer shifts towards the uphill side of the plate and the value of the maximum Nusselt number gradually increases at lower jet-to-plate spacings. (C) 2008 Elsevier Ltd. All rights reserved.