An experimental study on effect of inclination angle on the performance of a PCM-based flat-type heat sink

Avci M., Yazici M. Y.

APPLIED THERMAL ENGINEERING, cilt.131, ss.806-814, 2018 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 131
  • Basım Tarihi: 2018
  • Doi Numarası: 10.1016/j.applthermaleng.2017.12.069
  • Dergi Adı: APPLIED THERMAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.806-814
  • Anahtar Kelimeler: Thermal management, Electronics cooling, Heat sinks, Inclination, PCM, PHASE-CHANGE MATERIAL, THERMAL MANAGEMENT, ELECTRONIC COMPONENTS, INTERNAL FINS, SYSTEMS, TEMPERATURE
  • Recep Tayyip Erdoğan Üniversitesi Adresli: Hayır

Özet

An experimental study is carried out to investigate the effect of inclination angle on the thermal performance of a flat-type heat sink. Heat sinks without and with PCM are examined comparatively. The range of inclination angle from theta= 0 degrees (vertical) to theta= 90 degrees (horizontal) is considered. N-eicosane with a melting range of 35-37 degrees C is used as PCM. Temperatures are measured to characterize the heat transfer in air and PCM domains. In addition, an imaging technique is used to visualize the movement of melting interface. The results obtained show that the inclination angle has a remarkable effect on the thermal performance of the PCM-based heat sink while its effect is negligible for the one without PCM. (C) 2017 Elsevier Ltd. All rights reserved.