Computational gamma-ray attenuation and fast-neutron removal cross-section assessment of CrN, AlCrN and AlTiCrN ceramic coatings using EGS4 Monte Carlo and Phy-X/PSD
RADIATION PHYSICS AND CHEMISTRY, cilt.249, ss.1-18, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 249
- Basım Tarihi: 2026
- Doi Numarası: 10.1016/j.radphyschem.2026.114210
- Dergi Adı: RADIATION PHYSICS AND CHEMISTRY
- Derginin Tarandığı İndeksler: Academic Search Ultimate (EBSCO), Engineering Source (EBSCO), Scopus, Science Citation Index Expanded (SCI-EXPANDED), Chemical Abstracts Core, Chimica, Compendex, EMBASE, INSPEC
- Sayfa Sayıları: ss.1-18
- Recep Tayyip Erdoğan Üniversitesi Adresli: Evet
Özet
In this study, the computationally predicted gamma-ray attenuation behavior and fast-neutron removal cross-section characteristics of micrometre-scale CrN, AlCrN, and AlTiCrN ceramic coatings produced via cathodic arc evaporation were investigated. The shielding parameters were not measured by direct gamma- or neutron-transmission experiments; instead, mass attenuation coefficients (MAC, μ/ρ) in the 0.05–2.50 MeV range were obtained from EGS4 Monte Carlo simulations and Phy-X/PSD calculations, and the agreement between the two computational datasets was evaluated. Energy-dependent attenuation parameters, including half-value layer (HVL), mean free path (MFP), effective atomic number (Zeff), radiation protection efficiency (RPE), and kerma coefficients, were calculated. Statistical comparison showed good consistency between EGS4 and Phy-X/PSD for MAC, RPE, HVL, MFP, and kerma coefficients, whereas Zeff exhibited larger method-dependent deviations. All coatings showed higher attenuation at low photon energies due to the photoelectric effect, while Compton scattering dominated at intermediate energies. Among the investigated coatings, CrN exhibited the most favorable calculated γ-ray attenuation indicators, with lower HVL and MFP values and higher RPE values. The macroscopic fast-neutron removal cross-section (ΣR) was also calculated as a first-order neutron attenuation indicator, and CrN showed the highest ΣR value. Considering their limited thickness of approximately 2.3–2.8 μm, these coatings should not be regarded as replacements for conventional bulk radiation shields. Instead, nitride-based ceramic coatings may serve as secondary or multifunctional surface layers in space-restricted components requiring local radiation attenuation and mechanical durability.