Publications & Works

Publication Network
Articles 17
All (17)
SCI-E, SSCI, AHCI (13)
SCI-E, SSCI, AHCI, ESCI (13)
Scopus (13)
TRDizin (2)
Other Publications (2)

1. Numerical investigation of sinusoidally patterned thin-walled tubeswith variable wall thickness under quasi-static axial loading

Kuleyin H.
Journal of Structural Engineering & Applied Mechanics (Online) , vol.8, no.4, pp.348-361, 2025 (TRDizin)

2. Analysis of the contact problem functionally graded layer placed on a Pasternak foundation

YAZICIOĞLU A., YAYLACI M., SEKBAN D. M., KULEYİN H., UZUN YAYLACI E., BİRİNCİ A., et al.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , vol.105, no.8, 2025 (SCI-Expanded, Scopus) identifier

3. Synergistic Continuous and Short Fiber Reinforcement in Additively Manufactured Poly(Ether Ether Ketone) Composites

Uşun A., Kuleyin H., Gümrük R.
POLYMER COMPOSITES , vol.46, no.12, pp.1-10, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier

4. The Effect of Poly (Methyl Methacrylate) Content on Chemical, Thermomechanical, Mechanical, and Fatigue Life Characteristics of Ternary PC/ABS/PMMA Blends

Kuleyin H., Gümrük R.
POLYMERS , vol.17, no.14, pp.1-11, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

5. Characterization of thermal, chemical, mechanical, and fatigue behavior of 3D printed ABS-based elastomeric blends: ABS/EVA and ABS/TPU

Kuleyin H., Budak S., Yasan Ö. B., Gümrük R.
POLYMER TESTING , no.145, pp.1-11, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier

6. Energy absorbing characteristics of pressurized filled tubes under quasi-static loading

Kuleyin H., Mchich G., Gümrük R.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.32, pp.3230-3245, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

7. Fatigue behavior of polymethyl methacrylate/acrylonitrile butadiene styrene blends including blend composition, stress ratio, frequency, and holding pressure effects

Kuleyin H., Gümrük R., Çalışkan S.
INTERNATIONAL JOURNAL OF FATIGUE , vol.187, pp.1-17, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier

8. Predicting mechanical behavior of different thin-walled tubes using data-driven models

Kuleyin H., Karabacak Y. E., Gümrük R.
MATERIALS TODAY COMMUNICATIONS , vol.40, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier

9. Investigation of the compression behavior of ABS/EVA polymer blends

Budak S., Kuleyin H., Gümrük R.
The International Journal of Materials and Engineering Technology , vol.7, no.1, pp.12-17, 2024 (Peer-Reviewed Journal) Sustainable Development

10. The effect of ABS fraction on the fatigue behavior of PMMA/ABS polymer blends

Kuleyin H., Gümrük R., Caliskan S.
MATERIALS TODAY COMMUNICATIONS , vol.33, 2022 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

11. Investigating the effects of hot isostatic pressure heat treatment on mechanical properties of PLA based BCC lattices

KULEYİN H., UŞUN A., GÜMRÜK R.
Selcuk University Journal of Engineering Sciences , vol.21, no.1, 2022 (Peer-Reviewed Journal)

12. The numerical evaluation of crash performance of the pressurized thin-walled tubes

KULEYİN H., GÜMRÜK R.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.44, no.3, 2022 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

13. Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

BİCAN O., BAYÇA S. U., KULEYİN H., GÜMRÜK R.
METAL SCIENCE AND HEAT TREATMENT , vol.63, no.3-4, pp.156-162, 2021 (SCI-Expanded, Scopus) identifier identifier

14. The mechanical compression performance of ultra-fine grained stainless steel pyramidal lattice core

Kuleyin H., GÜMRÜK R., YANAR H., DEMIRTAS M., PÜRÇEK G.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.28, no.10, pp.1073-1078, 2021 (SCI-Expanded, Scopus) identifier identifier

15. Development of Optical, Microstructural and Mechanical Properties of Porcelain Stonewares

Aydin T., Bican O., GÜMRÜK R., KULEYİN H.
SCIENCE OF SINTERING , vol.53, no.1, pp.79-90, 2021 (SCI-Expanded, Scopus) identifier identifier

16. Pressure wave propagation in pressurized thin-walled circular tubes under axial impact

Kuleyin H., Gümrük R.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING , vol.130, pp.138-152, 2019 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

17. INVESTIGATION OF DYNAMICS MECHANICAL BEHAVIOUR OF STAINLESS STEEL STRUCTURES PRODUCED BY THE SELECTIVE LASER MELTING TECHNIQUE

GÜMRÜK R., KULEYİN H., MİNES B.
International Journal of Engineering, Technology and Natural Sciences , vol.1, no.1, pp.23-30, 2016 (TRDizin)
Papers Presented at Peer-Reviewed Scientific Conferences 8

1. The impact of calcite impurities on the mechanically activated (MCA) montmorillonite structure and its performance in limestone calcined clay cement (LC3) system

Baki V. A., Kuleyin H., Nas M., Alalea K.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 15 - 17 May 2025, pp.1-10, (Full Text) Sustainable Development

2. A NOVEL ULTRA-LIGHTWEIGHT LATTICE MANUFACTURING METHOD WITH CONTINUOUS CARBON FIBER REINFORCED PEEK

Gümrük R., Kuleyin H., Uşun A., Çamtekne A. H., Kebap F., İncehasan İ.
International Congress on 3D Printing(Additive Manufacturing) Technologies and Digital Industry (3D-PTC2024), Antalya, Turkey, 6 - 08 September 2024, pp.1-11, (Full Text)

3. COMPRESSION BEHAVIOR OF ABS/EVA POLYMER BLEND AT DIFFERENT STRAIN RATES

BUDAK S., KULEYİN H., GÜMRÜK R.
The 5th International Conference of Materials and Engineering Technology (TICMET'23), Trabzon, Turkey, 13 - 16 November 2023, (Summary Text)

4. Investigating the Reflective Performance of Micro Cellular Foam Based High-Performance Diffusive Reflectors

UŞUN A., GÜMRÜK R., KULEYİN H.
3. INTERNATIONAL DİCLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Turkey, 26 November 2022, (Full Text)

5. Investigating of the Effects of Hot Isostatic Pressure Heat Treatment on Mechanical Properties of PLA Based BCC Lattices

KULEYİN H., UŞUN A., GÜMRÜK R.
INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGIES, Konya, Turkey, 18 - 20 November 2021, (Full Text)

6. ENERGY ABSORPTION PERFORMANCE OF PRESSURIZED THIN-WALLED TUBES

KULEYİN H., GÜMRÜK R.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Turkey, 21 - 23 June 2019, pp.20-30, (Full Text)

7. BASINÇLANDIRILMIŞ İNCE CİDARLI TÜPLERİN ADAPTİF ENERJİ SÖNÜMLEYİCİ OLARAK KULLANIMI

KULEYİN H., GÜMRÜK R.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Turkey, 21 - 23 June 2019, pp.30-40, (Full Text)

8. INVESTIGATION OF DYNAMICS MECHANICAL BEHAVIOUR OF STAINLESS STEEL STRUCTURES PRODUCED BY THE SELECTIVE LASER MELTING TECHNIQUE

GÜMRÜK R., KULEYİN H., MİNES B.
MECHATECH INTERNATIONAL MECHANICAL ENGINEERING AND TECHNOLOGIES CONFERENCE, İstanbul, Turkey, 17 - 18 May 2016, pp.150-157, (Full Text)
Books 1

1. A Novel Ultra-Lightweight Lattice Manufacturing Method with Continuous Carbon Fiber Reinforced Peek

Gümrük R., Kuleyin H., Uşun A., Çamtekne A. H., Kebap F., İncehasan İ.
in: Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editor, Springer, California, pp.41-52, 2025 Sustainable Development
Metrics

Publication

27

Publication (WoS)

13

Publication (Scopus)

13

Citation (WoS)

80

H-Index (WoS)

5

Citation (Scopus)

45

H-Index (Scopus)

4

Citation (Scholar)

102

H-Index (Scholar)

6

Citation (Sum Other)

1

Project

10

Intellectual Property

1

Open Access

2
UN Sustainable Development Goals