Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 10

Characterization of thermal, chemical, mechanical, and fatigue behavior of 3D printed ABS-based elastomeric blends: ABS/EVA and ABS/TPU

Kuleyin H., Budak S., Yasan Ö. B., Gümrük R.
POLYMER TESTING , sa.145, ss.1-11, 2025 (SCI-Expanded) Sürdürülebilir Kalkınma

Fatigue behavior of polymethyl methacrylate/acrylonitrile butadiene styrene blends including blend composition, stress ratio, frequency, and holding pressure effects

Kuleyin H., Gümrük R., Çalışkan S.
INTERNATIONAL JOURNAL OF FATIGUE , cilt.187, ss.1-17, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier

Energy absorbing characteristics of pressurized filled tubes under quasi-static loading

Kuleyin H., Mchich G., Gümrük R.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , sa.1, ss.1-17, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier

Predicting mechanical behavior of different thin-walled tubes using data-driven models

Kuleyin H., Karabacak Y. E., Gümrük R.
MATERIALS TODAY COMMUNICATIONS , cilt.40, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier

The effect of ABS fraction on the fatigue behavior of PMMA/ABS polymer blends

Kuleyin H., Gümrük R., Caliskan S.
MATERIALS TODAY COMMUNICATIONS , cilt.33, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

The numerical evaluation of crash performance of the pressurized thin-walled tubes

KULEYİN H., GÜMRÜK R.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.44, sa.3, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

BİCAN O., BAYÇA S. U., KULEYİN H., GÜMRÜK R.
METAL SCIENCE AND HEAT TREATMENT , cilt.63, sa.3-4, ss.156-162, 2021 (SCI-Expanded) identifier identifier

The mechanical compression performance of ultra-fine grained stainless steel pyramidal lattice core

Kuleyin H., GÜMRÜK R., YANAR H., DEMIRTAS M., PÜRÇEK G.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.28, sa.10, ss.1073-1078, 2021 (SCI-Expanded) identifier identifier

Development of Optical, Microstructural and Mechanical Properties of Porcelain Stonewares

Aydin T., Bican O., GÜMRÜK R., KULEYİN H.
SCIENCE OF SINTERING , cilt.53, sa.1, ss.79-90, 2021 (SCI-Expanded) identifier identifier

Pressure wave propagation in pressurized thin-walled circular tubes under axial impact

Kuleyin H., Gümrük R.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING , cilt.130, ss.138-152, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Diğer Dergilerde Yayınlanan Makaleler 3

Investigation of the compression behavior of ABS/EVA polymer blends

Budak S., Kuleyin H., Gümrük R.
The International Journal of Materials and Engineering Technology , cilt.7, sa.1, ss.12-17, 2024 (Hakemli Dergi) Sürdürülebilir Kalkınma

Investigating the effects of hot isostatic pressure heat treatment on mechanical properties of PLA based BCC lattices

KULEYİN H., UŞUN A., GÜMRÜK R.
Selcuk University Journal of Engineering Sciences , cilt.21, sa.1, 2022 (Hakemli Dergi)

INVESTIGATION OF DYNAMICS MECHANICAL BEHAVIOUR OF STAINLESS STEEL STRUCTURES PRODUCED BY THE SELECTIVE LASER MELTING TECHNIQUE

GÜMRÜK R., KULEYİN H., MİNES B.
International Journal of Engineering, Technology and Natural Sciences , cilt.1, sa.1, ss.23-30, 2016 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 7

The impact of calcite impurities on the mechanically activated (MCA) montmorillonite structure and its performance in limestone calcined clay cement (LC3) system

Baki V. A., Kuleyin H., Nas M., Alalea K.
4th International Civil Engineering & Architecture Conference, Trabzon, Türkiye, 15 - 17 Mayıs 2025, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

A NOVEL ULTRA-LIGHTWEIGHT LATTICE MANUFACTURING METHOD WITH CONTINUOUS CARBON FIBER REINFORCED PEEK

Gümrük R., Kuleyin H., Uşun A., Çamtekne A. H., Kebap F., İncehasan İ.
International Congress on 3D Printing(Additive Manufacturing) Technologies and Digital Industry (3D-PTC2024), Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-11, (Tam Metin Bildiri)

Investigating the Reflective Performance of Micro Cellular Foam Based High-Performance Diffusive Reflectors

UŞUN A., GÜMRÜK R., KULEYİN H.
3. INTERNATIONAL DİCLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Türkiye, 26 Kasım 2022, (Tam Metin Bildiri)

Investigating of the Effects of Hot Isostatic Pressure Heat Treatment on Mechanical Properties of PLA Based BCC Lattices

KULEYİN H., UŞUN A., GÜMRÜK R.
INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGIES, Konya, Türkiye, 18 - 20 Kasım 2021, (Tam Metin Bildiri)

BASINÇLANDIRILMIŞ İNCE CİDARLI TÜPLERİN ADAPTİF ENERJİ SÖNÜMLEYİCİ OLARAK KULLANIMI

KULEYİN H., GÜMRÜK R.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.30-40, (Tam Metin Bildiri)

ENERGY ABSORPTION PERFORMANCE OF PRESSURIZED THIN-WALLED TUBES

KULEYİN H., GÜMRÜK R.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.20-30, (Tam Metin Bildiri)

INVESTIGATION OF DYNAMICS MECHANICAL BEHAVIOUR OF STAINLESS STEEL STRUCTURES PRODUCED BY THE SELECTIVE LASER MELTING TECHNIQUE

GÜMRÜK R., KULEYİN H., MİNES B.
MECHATECH INTERNATIONAL MECHANICAL ENGINEERING AND TECHNOLOGIES CONFERENCE, İstanbul, Türkiye, 17 - 18 Mayıs 2016, ss.150-157, (Tam Metin Bildiri)
Metrikler

Yayın

21

Atıf (WoS)

52

H-İndeks (WoS)

4

Atıf (Scopus)

45

H-İndeks (Scopus)

4

Atıf (Scholar)

65

H-İndeks (Scholar)

5

Proje

10

Fikri Mülkiyet

1

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları