Yayınlar & Eserler

Yayın Ağı
Makaleler 20
Tümü (20)
SCI-E, SSCI, AHCI (19)
SCI-E, SSCI, AHCI, ESCI (19)
Scopus (19)
Diğer Yayınlar (1)

1. Evaluation of prostheses retained zygomatic and dental implants in large defects in the maxilla due to tumors or major trauma by biomechanical 3-dimensional finite element analysis

Yemenoglu H., Beder M., Yaylacı M., Dizdar A., Alkurt M., Naralan M. E., et al.
BMC ORAL HEALTH , cilt.25, sa.1, 2025 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier identifier

2. Biomechanical evaluation of a lower-limb implant model under gait and stumbling conditions using finite element analysis

Nawel G., Abderahmane S., Abdelmadjid M., El Sallah Z. M., YAYLACI M., ÖZTÜRK Ş., et al.
SCIENTIFIC REPORTS , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus) identifier identifier

3. Microbial Calcite Precipitation by Marine-Derived Rhodococcus Strain RK-15: Characterization and Application in Concrete

Uzun Yaylacı E., Öztürk Ş., Kara A., Yaylacı M., Çağlak E.
GEOMICROBIOLOGY JOURNAL AN INTERNATIONAL JOURNAL OF GEOMICROBIOLOGY AND MICROBIAL BIOGEOCHEMISTRY , cilt.3, sa.4, ss.105-119, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

4. Fractional nonlocal couple stress waves in magneto elastic Nano beam using Homotopy Perturbation Technique

Selvamani R., Thangamuni P., Yaylacı M., Öztürk Ş., Uzun Yaylacı E.
ACTA MECHANICA , cilt.6, sa.9, ss.116-125, 2025 (SCI-Expanded, Scopus)

5. Experimental research of polymer fracture under hydro-mechanical behavior

Reffas Sid A., Elmmaguenni M., Moulgada A., Zagane M. E. S., Yaylacı M., Yekhlef R., et al.
GEOMECHANICS AND ENGINEERING , sa.2, ss.678-690, 2025 (SCI-Expanded, Scopus)

6. Numerical analysis of crack nucleation in contact mechanics under fretting wear loading

Baltach A., Benhamena A., Chaouch M. I., Zagane M. E., Yaylacı M., Öztürk Ş., et al.
STRUCTURAL ENGINEERING AND MECHANICS , sa.2, ss.345-350, 2025 (SCI-Expanded, Scopus)

7. Numerical analysis of three-point bending of sandwich panels with different core cross-sections: Finite element study

Achache H., Abdi G., El Sallah Z. M., Yaylacı M., Boughedaoui R., Öztürk Ş., et al.
ADVANCES IN NANO RESEARCH , cilt.2, ss.1009-1021, 2025 (SCI-Expanded, Scopus)

8. Comparison of offshore fish cage flotation systems designs using finite element method

Özdemir M. E., Öztürk Ş., Ay S., Mirzaloğlu İ., Terzi M., Yaylacı M.
Journal of Ceramics and Composites , cilt.1, sa.1, ss.40-45, 2025 (Hakemli Dergi)

9. Nonlinear poro-thermo-forced vibration in curved sandwich magneto-electro-elastic shells under hygrothermal environment

Selvamani R., Ebrahimi F., YAYLACI M., ÖZTÜRK Ş., UZUN YAYLACI E.
ACTA MECHANICA , cilt.235, sa.9, ss.5489-5528, 2024 (SCI-Expanded, Scopus) identifier identifier

10. Examining the contact problem of a functionally graded layer supported by an elastic half-plane with the analytical and numerical methods

YAYLACI M., YAYLI M. Ö., ÖZTÜRK Ş., Ay S., Özdemir M. E., UZUN YAYLACI E., et al.
MATHEMATICAL METHODS IN THE APPLIED SCIENCES , cilt.47, sa.12, ss.10400-10420, 2024 (SCI-Expanded, Scopus) identifier identifier

11. Formability behavior of AH-32 shipbuilding steel strengthened by friction stir process

SEKBAN D. M., UZUN YAYLACI E., Özdemir M. E., ÖZTÜRK Ş., YAYLACI M., Panda S. K.
THEORETICAL AND APPLIED FRACTURE MECHANICS , cilt.132, 2024 (SCI-Expanded, Scopus) identifier identifier

12. Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch

Abdelmadjid M., El Sallah Z. M., YAYLACI M., Djafar A. K., Ali B., Abdelghani B., et al.
STEEL AND COMPOSITE STRUCTURES , cilt.51, sa.1, ss.63-72, 2024 (SCI-Expanded, Scopus) identifier identifier

13. Evaluation of the effect on the permanent tooth germ and adjacent teeth by finite element impact analysis in the traumatized primary tooth Finite element impact analysis in the primary tooth

Kurt A., Yaylacı M., Dizdar A., Naralan M. E., Uzun Yaylacı E., Öztürk Ş., et al.
INTERNATIONAL JOURNAL OF PAEDIATRIC DENTISTRY , cilt.1, ss.1-10, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

14. Research of the crack problem of a functionally graded layer

YAYLACI M., UZUN YAYLACI E., Turan M., Özdemir M. E., ÖZTÜRK Ş., Ay S.
STEEL AND COMPOSITE STRUCTURES , cilt.50, sa.1, ss.77-87, 2024 (SCI-Expanded, Scopus) identifier identifier

15. Analyzing of continuous and discontinuous contact problems of a functionally graded layer: theory of elasticity and finite element method

YAYLACI M., Öner E., ADIYAMAN G., ÖZTÜRK Ş., UZUN YAYLACI E., BİRİNCİ A.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.52, sa.8, ss.5720-5738, 2024 (SCI-Expanded, Scopus) identifier identifier

16. Comparative study by the finite element method of three activities of a wearer of total hip prosthesis during the postoperative period

Moulgada A., El Sallah Zagane M., YAYLACI M., Djafar A. K., Abderahmane S., ÖZTÜRK Ş., et al.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.87, sa.6, ss.575-583, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

17. Vibration and buckling analyses of FGM beam with edge crack: Finite element and multilayer perceptron methods

YAYLACI M., Yaylacı E., Özdemir M. E., ÖZTÜRK Ş., Sesli H.
STEEL AND COMPOSITE STRUCTURES , cilt.46, sa.4, ss.565-575, 2023 (SCI-Expanded, Scopus) identifier identifier

18. Analysis of the mechano-bactericidal effects of nanopatterned surfaces on implant-derived bacteria using the FEM

UZUN YAYLACI E., Ozdemir M. E., Guvercin Y., ÖZTÜRK Ş., YAYLACI M.
ADVANCES IN NANO RESEARCH , cilt.15, sa.6, ss.567-577, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

19. Analyzing the mechano-bactericidal effect of nano-patterned surfaces by finite element method and verification with artificial neural networks

Yaylacı E., Yaylacı M., Özdemir M. E., Terzi M., Öztürk Ş.
ADVANCES IN NANO RESEARCH , cilt.15, sa.2, ss.165-174, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

20. Implementation of finite element and artificial neural network methods to analyze the contact problem of a functionally graded layer containing crack

YAYLACI M., UZUN YAYLACI E., Ozdemir M. E., Ay S., ÖZTÜRK Ş.
STEEL AND COMPOSITE STRUCTURES , cilt.45, sa.4, ss.501-511, 2022 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 3

1. Computational Contact Mechanics Problem of Two Functionally Graded Orthotropic Layers Resting on a Pasternak Foundation

Öztürk Ş., Öner E., Yaylacı M.
6th International Congress on Engineering, Architecture and Design, İstanbul, Türkiye, 20 - 24 Aralık 2025, cilt.1, ss.1228-1235, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

2. MODELING AND ANALYSIS OF REINFORCED CONCRETE BUILDINGS USING DIFFERENT TYPES OF SEISMIC ISOLATOR UNITS ACCORDING TO TBDY 2018

Öztürk Ş., Adanur S., Yaylacı M.
5th International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.600-601, (Özet Bildiri)

3. Comparison of offshore fish cage systems' floating collar designs with finite element method

Özdemir M. E., Terzi M., Yaylacı M., Öztürk Ş.
Global Maritime Congress (GMC'24), İstanbul, Türkiye, 20 Mayıs 2024, ss.554, (Özet Bildiri)
Metrikler

Yayın

24

Yayın (WoS)

20

Yayın (Scopus)

20

Atıf (WoS)

415

H-İndeks (WoS)

12

Atıf (Scopus)

380

H-İndeks (Scopus)

11

Atıf (Scholar)

430

H-İndeks (Scholar)

12

Proje

1

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları