Yayınlar & Eserler

Yayın Ağı
Makaleler 26
Tümü (26)
SCI-E, SSCI, AHCI (24)
SCI-E, SSCI, AHCI, ESCI (24)
Scopus (24)
TRDizin (1)
Diğer Yayınlar (1)

1. A COMPARATIVE STUDY ON MECHANICAL PERFORMANCE OF PLA, ABS, AND CF MATERIALS FABRICATED BY FUSED DEPOSITION MODELING

ALPARSLAN C., BAYRAKTAR Ş., Gupta K.
Facta Universitatis, Series: Mechanical Engineering , cilt.24, sa.2, ss.243-260, 2026 (SCI-Expanded, Scopus)

2. Prediction and Optimization of Drilling Outputs in C355 Alloy with ANN Integrated CRITIC-WASPAS-COCOSO Method

ALPARSLAN C., Ozhabiboglu C., Vijayananth K., BAYRAKTAR Ş.
SILICON , cilt.18, sa.10, ss.3441-3461, 2026 (SCI-Expanded, Scopus)

3. Drilling Characteristics of Additively Manufactured PLA/17-4 PH Stainless Steel Hybrid Composite: Thrust Force, Surface Roughness, Vibration and Temperature Change

Şentürk E., Alparslan C., Ötüken R., Erhan M. F., Bayraktar Ş.
POLYMERS , cilt.18, sa.12, ss.1434, 2026 (SCI-Expanded, Scopus)

4. Mechanical Enhancement and Fracture Mechanisms of SLA Photopolymer Composites Reinforced with Fish Bone Ash

Alparslan C., Minaz M., Baysal E., Yentimur M. F., Koçar O., Bayraktar Ş.
POLYMERS , cilt.18, sa.11, ss.1-10, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

5. An Experimental Study and FEM-Based Analysis for Road Safety Barriers: Additively Manufactured PLA-Geopolymer Hybrid Composites

YENTİMUR M. F., Akarsu O., ALPARSLAN C., Kutuk-Sert T., BAYRAKTAR Ş., AYDIN A. C., et al.
POLYMERS , cilt.18, sa.8, 2026 (SCI-Expanded, Scopus)

6. Recent Trends on Additive Manufactured Advanced Materials: A Targeted Review on Functional Capabilities and Process Integration

Alparslan C., Şentürk E., Bayraktar Ş.
SURFACE TOPOGRAPHY: METROLOGY AND PROPERTIES , cilt.14, sa.1, ss.1-44, 2026 (SCI-Expanded, Scopus)

7. Reinforcement of Novel PLA/17-4 PH Stainless Steel Hybrid Structures Fabricated by FDM: The Effects of Layer Configuration, Infill Density and Pattern

Ötüken R., Alparslan C., Erhan M. F., Bayraktar Ş.
POLYMERS , cilt.18, ss.672, 2026 (SCI-Expanded, Scopus)

8. Additive manufacturing in biomaterials: a comprehensive and integrated review of innovations in tissue engineering, bioprinting, implant design, and regenerative medicine

Alparslan C., Bayraktar Ş.
SURFACE TOPOGRAPHY: METROLOGY AND PROPERTIES , cilt.14, ss.13003, 2026 (SCI-Expanded, Scopus)

9. Drilling Performance Evaluation of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic Composites

Uşun A., Alparslan C., Erhan M. F., Kuleyin H., Gümrük R., Bayraktar Ş.
POLYMERS , cilt.18, sa.4, ss.544, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

10. Evaluation of rainbow trout response to the optimal anesthetic concentration of citronella oil (Cymbopogon nardus) predicted by artificial neural network

Minaz M., Félix L. M., Er A., Köse Ö., Ak K., Alparslan C., et al.
Aquaculture , cilt.613, sa.Part 1, ss.743326, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. Modeling the Effect of Cold Stratification on Seed Germination Performance of Rudbeckia fulgida Aiton Using Response Surface Methodology (RSM)

Oğuztürk T., Alparslan C., Sipahi M., Ercan Oğuztürk G., Topaloglu E. N., Bayraktar Ş., et al.
PLANTS-BASEL , cilt.15, sa.2, 2026 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma

12. Machinability performance evaluation in turning of Zn-40Al-2Cu-2Si alloy: The effect of solutionizing-artificial aging

Bayraktar Ş., Alparslan C., Pehlivan G.
ALEXANDRIA ENGINEERING JOURNAL , cilt.134, ss.152-162, 2026 (SCI-Expanded, Scopus)

13. Integrated Microstructural, Mechanical and Machinability Assessment of AlSi10Mg and AlSi10MgCu Alloys: Experimental and RSM-Based Optimization Approach

Alparslan C., Can Y. T., Dervisoglu U., Altintas A., Bayraktar Ş.
SILICON , 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

14. Al7SiMg Alaşımının Delinmesinde Kesme Parametrelerinin İlerleme Kuvveti ve Moment Üzerindeki Etkilerinin Deneysel İncelenmesi

Alparslan C., Bayraktar Ş.
Gazi University Journal of Science Part C: Design and Technology , cilt.13, sa.4, ss.1657-1669, 2025 (TRDizin)

15. Comparative Evaluation and Optimization of Auxin Type and Concentration on Rooting Efficiency of Photinia x fraseri Dress: Stem Cuttings Using Response Surface Methodology

Ercan Oğuztürk G., Pulatkan M., Alparslan C., Oğuztürk T.
PLANTS-BASEL , cilt.14, sa.15, 2025 (SCI-Expanded, Scopus)

16. Using machine learning to predict anesthetic dose in fish: a case study using nutmeg oil

MİNAZ M., ALPARSLAN C., ER A.
FRONTIERS IN VETERINARY SCIENCE , cilt.12, 2025 (SCI-Expanded, Scopus) Creative Commons License

17. Effect of Different Indole Butyric Acid (IBA) Concentrations in Various Rooting Media on the Rooting Success of Loropetalum chinense var. rubrum Yieh Cuttings and Its Modeling with Artificial Neural Networks

Oğuztürk T., Alparslan C., Aydın Y., Öztatar U., Ercan Oğuztürk G.
Horticulturae , cilt.11, sa.6, ss.1-24, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

18. Advances in Digital Light Processing (DLP) Bioprinting: A Review of Biomaterials and Its Applications, Innovations, Challenges, and Future Perspectives

ALPARSLAN C., BAYRAKTAR Ş.
POLYMERS , cilt.17, sa.9, 2025 (SCI-Expanded, Scopus)

19. The Effect of Green Areas on Urban Microclimate: A University Campus Model Case

Oğuztürk G., Sünbül S., Alparslan C.
APPLIED SCIENCES-BASEL , cilt.15, sa.8, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

20. A comprehensive review on sustainability in EDM process of additive manufactured materials

Şentürk E., Alparslan C., Bayraktar Ş., Korkmaz M. E., Günay M.
Measurement: Journal of the International Measurement Confederation , cilt.245, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

21. A Review on Additive Manufactured Engineering Materials for Enhanced Road Safety and Transportation Applications

Alparslan C., Yentimur M. F., Kütük T., Bayraktar Ş.
POLYMERS , cilt.17, sa.7, ss.1-42, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

22. A holistic research based on RSM and ANN for improving drilling outcomes in Al–Si–Cu–Mg (C355) alloy

Bayraktar Ş., Alparslan C., Salihoğlu N., Sarıkaya M.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY , cilt.35, ss.1596-1607, 2025 (SCI-Expanded, Scopus)

23. The impact of heat treatment process on the drilling characteristics of Al–5Si–1Cu–Mg alloy produced by sand casting

BAYRAKTAR Ş., ALPARSLAN C., Salihoğlu N., Sarıkaya M.
Journal of Materials Research and Technology , cilt.33, ss.2764-2772, 2024 (SCI-Expanded, Scopus)

24. Experimental research and optimization based on response surface methodology on machining characteristics of cast Al-7Si-0.6 Mg alloy: Effects of cutting parameters and heat treatment

ALPARSLAN C., BAYRAKTAR Ş.
MEASUREMENT , cilt.236, 2024 (SCI-Expanded, Scopus)

25. An Experimental Study on Microstructural, Mechanical and Machinability Properties of As-Cast and Heat-Treated Al-7Si-Mg Alloy

ALPARSLAN C., BAYRAKTAR Ş.
SILICON , cilt.16, sa.9, ss.3971-3985, 2024 (SCI-Expanded, Scopus)

26. Tool Wear in Machining of Wrought and Cast Aluminium Alloys: Literature Review

Alparslan C., Bayraktar Ş.
İmalat Teknolojileri ve Uygulamaları , cilt.2, sa.3, ss.34-46, 2021 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 5

1. Effect of Build Orientation on Mechanical Performance of ABS Material: A Comparative Evaluation for Flat, and Upright Directions

Alparslan C., Bayraktar Ş.
6th International Conference On Frontiers In Academic Research ICFAR 2025, Konya, Türkiye, 16 - 17 Aralık 2025, ss.323-334, (Tam Metin Bildiri)

2. Influence of Infill Density on Tensile and Fracture Behavior of ABS Material in Fused Deposition Modeling

Alparslan C., Bayraktar Ş.
6th International Conference On Frontiers In Academic Research ICFAR 2025, Konya, Türkiye, 16 - 17 Aralık 2025, ss.314-322, (Tam Metin Bildiri)

3. Machinability Assessment of Al-7Si-Mg Alloy: Influence of Cutting Conditions on Drilling Temperature and Surface Roughness

Alparslan C., Bayraktar Ş.
5TH INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATIVE STUDIES ICSIS 2025, Konya, Türkiye, 15 - 16 Temmuz 2025, ss.184-192, (Tam Metin Bildiri)

4. Analysis of Surface Roughness in Machining of Al-Si Based Alloys: An Experimental Study

Alparslan C., Bayraktar Ş.
ICENTE (7th International Conference on Engineering Technologies), Konya, Türkiye, 23 - 25 Kasım 2023, ss.276-280, (Tam Metin Bildiri)

5. Comparison of Machinability Performances in Milling of Al-7Si-Mg and Al-7Si-0.6Mg Alloys

Alparslan C., Bayraktar Ş.
5th International Conference on Applied Engineering and Natural Sciences , Konya, Türkiye, 10 - 12 Temmuz 2023, cilt.1, sa.1, ss.977-983, (Tam Metin Bildiri)
Kitaplar 6

1. Green Electrical Discharge Machining: Sustainable Practices and Environmental Impact Reduction

ALPARSLAN C., BAYRAKTAR Ş.
Developments in Electric Discharge Machining, CRC Press, ss.1-21, 2026

2. Challenges and Innovations in 3D Printed Biomaterials and Biomedical Applications

Alparslan C., Bayraktar Ş.
Challenges and Innovations in 3D Printed Bio-Organs and Their Materials, Adam Khan M.,Gurpreet Singh,Sarina Sulaiman, Editör, Springer Nature, Aarau, ss.45-66, 2025

3. Comprasion of SLM, SLS and DLMS Techniques in Additive Manufactured AlSi10Mg Alloys

Bayraktar Ş., Alparslan C.
Innovation and Sustainable Manufacturing, Machado Carolina; Davim Paulo, Editör, Elsevier-Woodhead Publishing, ss.231-253, 2023 Sürdürülebilir Kalkınma

4. Introduction to Gas and Solid State Laser Techniques in Cutting Process

Bayraktar Ş., Alparslan C.
Advanced Engineering of Materials Through Lasers, J. Radhakrishnan,Sunil Pathak, Editör, Springer Nature, Zürich, ss.35-54, 2022

5. Artificial Neural Networks for Machining

Bayraktar Ş., Alparslan C.
Advances in Sustainable Machining and Manufacturing Processes, Kishor Kumar Gajrani,Arbind Prasad,Ashwani Kumar, Editör, CRC, New York , New York, ss.189-204, 2022

6. Sustainable Abrasive Jet Machining

Bayraktar Ş., Alparslan C.
Advances in Sustainable Machining and Manufacturing Processes, Kishor Kumar Gajrani,Arbind Prasad,Ashwani Kumar, Editör, CRC, New York , New York, ss.173-188, 2022
Metrikler

Yayın

37

Yayın (WoS)

24

Yayın (Scopus)

25

Atıf (WoS)

190

H-İndeks (WoS)

7

Atıf (Scopus)

201

H-İndeks (Scopus)

8

Atıf (Scholar)

320

H-İndeks (Scholar)

12

Atıf (Sobiad)

1

H-İndeks (Sobiad)

1

Toplam Atıf Sayısı

211

Proje

43

Fikri Mülkiyet

1

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları
SDG 1: AMAÇ 1: YOKSULLUĞA SON
SDG 2: AMAÇ 2: AÇLIĞA SON
SDG 3: AMAÇ 3: SAĞLIKLI BİREYLER
SDG 4: AMAÇ 4: NİTELİKLİ EĞİTİM
SDG 5: AMAÇ 5: CİNSİYET EŞİTLİĞİ
SDG 6: AMAÇ 6: TEMİZ SU VE SIHHİ KOŞULLAR
SDG 9: AMAÇ 9: SANAYİ, YENİLİKÇİLİK VE ALTYAPI
SDG 10: AMAÇ 10: EŞİTSİZLİKLERİN AZALTILMASI
SDG 11: AMAÇ 11: SÜRDÜRÜLEBİLİR ŞEHİR VE YAŞAM ALANLARI
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM
SDG 13: AMAÇ 13: İKLİM EYLEMİ
SDG 14: AMAÇ 14: SUDAKİ YAŞAM
SDG 15: AMAÇ 15: KARASAL YAŞAM
SDG 17: AMAÇ 17: AMAÇLAR İÇİN ORTAKLIKLAR