Publications & Works

Publication Network
Articles 10
All (10)
SCI-E, SSCI, AHCI (9)
SCI-E, SSCI, AHCI, ESCI (9)
Scopus (9)
TRDizin (3)

1. Production of New Aluminum-Based High-Entropy Light Alloy Al49Zn13Cu11Ni10Si9Mg8 by Conventional Casting Method and Investigation of Some Material Properties of this Alloy

Hacıosmanoğlu M., Hekimoğlu A. P.
INTERNATIONAL JOURNAL OF METALCASTING , vol.1, no.1, pp.1-17, 2026 (SCI-Expanded, Scopus)

2. Effect of 0.12wt%Sr Addition on Structural, Mechanical and Tribological Properties of Al-12Si+10wt%Zn Alloy

HEKİMOĞLU A. P., Zimitoglu S., HACIOSMANOĞLU M.
INTERNATIONAL JOURNAL OF METALCASTING , vol.19, no.6, pp.3621-3633, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

3. Corrosion and mechanical performance of novel electrochemical oxidation coatings on AZ31 magnesium alloys for biomedical applications

Yavuzyegit B., Karali K., Avcu E., De Mori A., Quizon D., Hacıosmanoğlu M., et al.
SURFACE & COATINGS TECHNOLOGY , vol.507, 2025 (SCI-Expanded, Scopus) identifier identifier

4. Effect of Zn Addition on the Structural, Mechanical and Tribological Properties of Al12Si (EN AC 44100) Alloy

HEKİMOĞLU A. P., Sonmezisik A., Zimitoglu S., HACIOSMANOĞLU M., Savaskan T.
INTERNATIONAL JOURNAL OF METALCASTING , vol.19, no.3, pp.1825-1836, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

5. Investigation of the effects of T5 and T6 heat treatments on the structural, mechanical, and tribological properties of Zn-40Al-2Cu-0.1Sr alloy

Hekimoglu A. P., Haciosmanoglu M., Tellioglu M., Savaskan T.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.39, no.4, pp.2187-2196, 2024 (SCI-Expanded, Scopus, TRDizin) Sustainable Development identifier identifier

6. Effect of Strontium on the Microstructure, Mechanical, and Tribological Properties of the Zn-40Al-2Cu Alloy

Hacıosmanoğlu M., Tellioğlu M., Hekimoğlu A. P.
INTERNATIONAL JOURNAL OF METALCASTING , vol.17, no.4, pp.3133-3142, 2023 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

7. EFFECT OF CASE DEPTHS ON CORROSION PROPERTIES OF HARD ANODIC OXIDIZED A356 ALUMINUM ALLOY

Haciosmanoglu M., Basyigit A. B., Hekimoğlu A. P., Bican O.
SURFACE REVIEW AND LETTERS , vol.30, no.04, 2023 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

8. A review on converting plastic wastes into clean hydrogen via gasification for better sustainability

Midilli A., Küçük H., Hacıosmanoğlu M., Akbulut U., Dincer İ.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.46, no.4, pp.4001-4032, 2022 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

9. Effect of different zinc contents on the structural, mechanical and tribological properties of EN AC-48100 (Al-17Si-4Cu-Mg) Alloy

Hekimoğlu A. P., Hacıosmanoğlu M., Baki M.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.35, no.4, pp.1799-1814, 2020 (SCI-Expanded, Scopus, TRDizin) Sustainable Development identifier identifier

10. Bakır ve Magnezyum Katkılarının Al-17Si Alaşımının Yapısal, Mekanik ve Tribolojik Özelliklerine Etkisi

Hekimoğlu A. P., Hacıosmanoğlu M.
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , vol.11, no.2, pp.685-694, 2019 (TRDizin) Sustainable Development
Papers Presented at Peer-Reviewed Scientific Conferences 20

1. An Assessment of Thermodynamic Parameters Determining Phase Stability and Microstructure In High-Entropy Alloy Design

Hacıosmanoğlu M., Hekimoğlu A. P.
4th International Scientific Research and Innovation Congress, Bursa, Turkey, 14 - 16 December 2025, pp.2493-2494, (Summary Text)

2. T6 Isıl İşleminin Zn-40Al-2Cu Alaşımının Korozyon Hızına Etkisi

Hekimoğlu A. P., Hacıosmanoğlu M.
Anadolu 16. Uluslararası Uygulamalı Bilimler Kongresi, Van, Turkey, 20 - 22 December 2024, pp.426-436, (Full Text) Sustainable Development

3. Stronsiyum Katkısının Zn-40Al-2Cu Alaşımının Korozyon Direncine Etkisi

Hekimoğlu A. P., Hacıosmanoğlu M.
Selçuk 11. Uluslararası Uygulamalı Bilimler Kongresi, Konya, Turkey, 13 - 15 December 2024, pp.580-590, (Full Text) Sustainable Development

4. Ark Ergitme Yöntemi ile İmalatın Al-17Si ve Al-17Si-0,2Ti Alaşımlarının İçyapı ve Mekanik Özelliklerine Etkilerinin İncelenmesi

Hekimoğlu A. P., Hacıosmanoğlu M.
Karadeniz 17th International Conference on Applied Sciences, Rize, Turkey, 8 - 10 November 2024, pp.601-612, (Full Text) Sustainable Development

5. Effect of Ti Additives on Microstructure and Strength Properties of Al-12Si Alloy

Hekimoğlu A. P., Hacıosmanoğlu M.
5th International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 25 - 27 September 2024, pp.764-774, (Full Text) Sustainable Development

6. Titanyum Katkısının Al-7Si Alaşımının Sertlik ve Dayanım Değerlerine Etkilerinin İncelenmesi

Hacıosmanoğlu M., Hekimoğlu A. P.
6th International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 25 - 26 September 2024, pp.137-143, (Full Text) Sustainable Development

7. The Effect of Different Stress Levels on the Corrosion of Reinforcing Steel

Çelik İ., Ustabaş İ., Hekimoğlu A. P., Hacıosmanoğlu M.
1st International Conference on Recent Academic Studies ICRAS 2023, Konya, Turkey, 02 May 2023, vol.1, pp.70-75, (Full Text)

8. Effect of Zinc Additions on Corrosion Resistance of Al-17Si-4Cu0,6Mg-0,2Ti Alloy

Hacıosmanoğlu M., Hekimoğlu A. P.
Savunma Sanayi ve Sempozyumu Sergisi'22, Kayseri, Turkey, 13 October 2022, pp.123-127, (Full Text)

9. Exergy Loss Calculation in a Power Generation System for a Research Hospital

Hacıosmanoğlu M., Midilli A.
12th International Exergy, Energy and Environment Symposium (IEEES-12), Ad-Dawhah, Qatar, 20 - 24 December 2020, pp.155, (Summary Text)

10. Al-17Si-(0-1)Ti Alaşımlarının İçyapısı ve Mekanik Özellikleri

Hacıosmanoğlu M., Hekimoğlu A. P.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), Nevşehir, Turkey, 21 - 23 June 2019, pp.563-568, (Full Text) Sustainable Development

11. Effect of Cooling Rate on Corrosion Resistance of Al-25Zn-3Cu Alloy

Hekimoğlu A. P., Hacıosmanoğlu M.
CIEA’ 2018 International Conference on Innovative Engineering Applications, Sivas, Turkey, 20 - 22 September 2018, pp.80-88, (Full Text) Sustainable Development

12. Al-(2-30)Si Alaşımlarının İçyapı ve Mekanik Özellikleri

Hekimoğlu A. P., Hacıosmanoğlu M.
3. International Conference on Material Science and Technology in Cappadocia (IMSTEC’ 2018), Nevşehir, Turkey, 17 - 19 September 2018, pp.169-174, (Full Text)

13. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-(2-30)Si ALLOYS

HEKİMOĞLU A. P., HACIOSMANOĞLU M.
3nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), Nevşehir, Turkey, 17 - 19 September 2018, pp.1-6, (Full Text)

14. Soğuma Hızının Al-25Zn-3Cu Alaşımının Mekanik Özelliklerine Etkisi

Hekimoğlu A. P., Hacıosmanoğlu M., Bekiryazıcı E.
III. Uluslararası Mesleki ve Teknik Bilimler Kongresi, Gaziantep, Turkey, 21 - 22 June 2018, pp.835-846, (Full Text)

15. SOĞUMA HIZININ AL-25ZN-3CU ALAŞIMININ MEKANİK ÖZELLİKLERİNE ETKİSİ

HEKİMOĞLU A. P., HACIOSMANOĞLU M., Bekiryazıcı E.
III. Uluslararası Mesleki ve Teknik Bilimler Kongresi, Gaziantep, Turkey, 21 - 22 June 2018, pp.1-13, (Full Text)

16. A Performance Comparison Study of Uncoated and TiAlN Coated Carbide End Mill on Machining of the Al-35Zn Alloy

Bayraktar Ş., Hekimoğlu A. P., Turgut Y., Hacıosmanoğlu M.
9. International Conference on Tribology (BalkanTRib’17), Nevşehir, Turkey, 13 - 15 September 2017, pp.490-496, (Full Text) identifier

17. Farklı Kesici Takımların Al-5Zn Alaşımının İşlenebilirliğine Etkisi

Bayraktar Ş., Hekimoğlu A. P., Turgut Y., Hacıosmanoğlu M.
ISIDE 2nd International Symposium on Industrial Design Engineering, Nevşehir, Turkey, 13 - 15 September 2017, pp.134-140, (Full Text)

18. A Study on Comparision of PerformancesCuttingTool in Milling of Al-35Zn Alloy

Bayraktar Ş., Hekimoğlu A. P., Turgut Y., Hacıosmanoğlu M.
9. International Conference on Tribology (BalkanTRib’17), Nevşehir, Turkey, 13 - 15 September 2017, pp.1, (Full Text)

19. Effect of Different Cutting Tools on Machinability of the Al-5Zn Alloy

BAYRAKTAR Ş., HEKİMOĞLU A. P., TURGUT Y., HACIOSMANOĞLU M.
2'nd International Symposium on Industrial Design & Engineering, Nevşehir, Turkey, 13 - 15 September 2017, pp.1, (Full Text)

20. Effect of Different Cutting Tools on Machinability of the Al-5Zn Alloy

BAYRAKTAR Ş., HEKİMOĞLU A. P., TURGUT Y., HACIOSMANOĞLU M.
2'nd International Symposium on Industrial Design & Engineering, Nevşehir, Turkey, 13 - 15 September 2017, pp.1, (Full Text)
Metrics

Publication

30

Publication (WoS)

9

Publication (Scopus)

10

Citation (WoS)

80

H-Index (WoS)

5

Citation (Scopus)

85

H-Index (Scopus)

5

Citation (Scholar)

110

H-Index (Scholar)

5

Citation (Sobiad)

2

H-Index (Sobiad)

1

Project

10

Intellectual Property

3
UN Sustainable Development Goals