Prof. Dr. MURAT YAYLACI

Yayın Ağı

Makaleler 129

1. Structural, electronic, optical, and thermoelectric properties of CaXO₃ (X = Si, Ge, Ti) perovskite for photovoltaics and optical devices.

Fatmi M., Ghebouli M. A., Bouferrache K., Ghebouli B., Alomairy S., Jaipallah Abdelmageed Abualreish M., et al.

Scientific reports , cilt.15, sa.1, ss.43569, 2025 (SCI-Expanded, Scopus)

2. Evaluation of prostheses retained zygomatic and dental implants in large defects in the maxilla due to tumors or major trauma by biomechanical 3-dimensional finite element analysis

Yemenoglu H., Beder M., Yaylacı M., Dizdar A., Alkurt M., Naralan M. E., et al.

BMC ORAL HEALTH , cilt.25, sa.1, 2025 (SCI-Expanded, Scopus)

3. Smart vibro-acoustic control of FGP concrete structures via NC shunt damping and DNN-GA optimization

Wang B., Han B., Safarpour M., Yaylacı M.

Smart Structures and Systems , cilt.36, sa.4, ss.223-237, 2025 (Scopus)

4. Smart tunable metamaterial concrete structures with actuator and sensor layers in the concept of stability analysis and energy management

Du J., Yuan Z., Babaee M., Yaylacı M.

Smart Structures and Systems , cilt.36, sa.5, ss.239-251, 2025 (Scopus)

5. Double superposition shear deformation theory for buckling analysis of layered composite circular closed cylindrical shells in underwater environments

Lezgy-Nazargah M., YAYLACI M., Shad H.

Ocean Engineering , cilt.340, 2025 (SCI-Expanded, Scopus)

6. Allision risk and impact analysis in recreational fishing boats using fuzzy bayesian networks and the finite element method

TURNA İ., ÖZTÜRK O. B., KARTAL Ş. E., PİRİM A. E., KURT Z., YAYLACI M.

FISHERIES RESEARCH , cilt.291, 2025 (SCI-Expanded, Scopus)

7. The behavior of Beams Reinforced with Patches under Three-Point Bending: an Experimental Investigation

Benaoum F., Khelil F., Baltach A., Gülpınar Sekban D. Ü., Uzun Yaylacı E., Benhamena A., et al.

POLYMERS , cilt.7, sa.22, ss.1-18, 2025 (SCI-Expanded, Scopus)

8. Stability analysis and optimization management of nanocomposites-reinforced panels using a thickness-dependent shear deformation theory and HDQM

Mohammad S. I., Alenazi S. A., Jadallah H., Al Oraini B., Vasudevan A., Elhadi K. M., et al.

ADVANCES IN NANO RESEARCH , cilt.19, sa.4, ss.335-346, 2025 (SCI-Expanded, Scopus)

9. Biomechanical Evaluation of a Lower-Limb Implant Model Under Gait and Stumbling Conditions Using Finite Element Analysis

Nawel G., Abderahmane S., Abdelmadjid M., El Sallah Z. M., Yaylacı M., Öztürk Ş., et al.

SCIENTIFIC REPORTS , cilt.15, ss.41443, 2025 (SCI-Expanded, Scopus)

10. An integrated interval type-2 fuzzy SLIM and FEM model for working aloft risk analysis in shipboard operations

ÖZTÜRK O. B., KARTAL Ş. E., TURNA İ., PİRİM A. E., KURT Z., Guvercin Y., et al.

APPLIED OCEAN RESEARCH , cilt.163, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. Physics-informed deep neural networks for sports applications: Enhancing tennis handle performance with nanocomposites

Tao Y. Y., Chen L., Yaylacı M.

ADVANCES IN NANO RESEARCH , cilt.19, sa.3, ss.273-284, 2025 (SCI-Expanded, Scopus)

12. A Multi-Perspective Exploration of Contact Behavior in Orthotropic Layer Resting on Isotropic Half-Plane

Öner E., Terzi M., Uzun Yaylacı E., Oktay M. G., Yaylacı M.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY - TRANSACTIONS OF MECHANICAL ENGINEERING , cilt.5, sa.9, ss.119-130, 2025 (SCI-Expanded, Scopus)

13. Stability analysis and visual design of carbon nanotube-reinforced spherical shells products using higher-order theories and HDQM

Qiang W., Bin Abdul Majid A. Z., Yaylacı M.

ADVANCES IN NANO RESEARCH , cilt.19, sa.3, ss.225-236, 2025 (SCI-Expanded, Scopus)

14. Investigation of the effect of composite patch repair on the life of a plate with two lateral cracks

Moulgada A., Zagane M. E. S., Djafar A. K., Sahli A., Yaylacı M., Mirzaloğlu İ., et al.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.8, sa.3, ss.123-137, 2025 (SCI-Expanded, Scopus)

15. Improved Timoshenko beam theory for mechanical and thermal flexural behavior of porous cross-ply laminated beams

Rajeh M. A., Al-Osta M. A., Bourada F., Tounsi A., Al-Dulaijan S. U., YAYLACI M.

GEOMECHANICS AND ENGINEERING , cilt.42, sa.6, 2025 (SCI-Expanded, Scopus)

16. Mathematical modeling for stability and instability analysis of carbon nanotube enhanced fibers in clothing design

Wu Q. W., Li K., Yaylacı M.

ADVANCES IN NANO RESEARCH , cilt.19, sa.3, ss.285-296, 2025 (SCI-Expanded, Scopus)

17. A 499-line MATLAB implementation for frictional contact topology optimization

Wang B., Yaylacı M., Bai J., Zuo W.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION , cilt.68, sa.9, 2025 (SCI-Expanded, Scopus)

18. Fractional DPL Thermoelasticity With Rabotnov Kernel ina Rotating Stressed Medium With Spherical Cavity

Abouelregal A. E., Alsaeed S. S., Uzun Yaylacı E., Yaylacı M.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES , cilt.5, sa.6, ss.134-151, 2025 (SCI-Expanded, Scopus)

19. Comparative study by FEM of different liners of a transfemoral amputated lower limb

Cherif A. A., Abdelmadjid M., El Sallah Z. M., Ali B., YAYLACI M., Abderahmane S., et al.

SCIENTIFIC REPORTS , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)

20. Efficient detection of piezoelectric material defects in smart structures using nonlinear vibration and neural networks validation

Mohammad S. I., Vasudevan A., Alkasassbeh A., Ahmad O. A., Alfugara A., Kahla N. B., et al.

SMART STRUCTURES AND SYSTEMS , cilt.36, sa.2, ss.97-109, 2025 (SCI-Expanded, Scopus)

21. Novel multimodal shunt circuit architecture for simultaneous subsonic flutter control and energy scavenging

Mohammad S. I., Vasudevan A., Alfugara A., Abdullah M. R., Kraiem H., Alashker Y., et al.

SMART STRUCTURES AND SYSTEMS , cilt.36, sa.2, ss.111-1222, 2025 (SCI-Expanded, Scopus)

22. On the bending behavior of porous functionally graded plates under hygrothermo-mechanical loads

Daouadji B. H., Attia A., Bousahla A. A., Tounsi A., Tounsi A., Mohamed S. M., et al.

GEOMECHANICS AND ENGINEERING , cilt.42, sa.3, ss.191-206, 2025 (SCI-Expanded, Scopus)

23. Analysis of the contact problem functionally graded layer placed on a Pasternak foundation

Yazıcıoğlu A., Yaylacı M., Sekban D. M., Kuleyin H., Uzun Yaylacı E., Birinci A., et al.

ZAMM ZEITSCHRIFT FÜR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.9, sa.4, ss.245-256, 2025 (SCI-Expanded, Scopus)

24. Analytical solution for imperfect functionally graded beams resting on viscoelastic foundation

Benchohra M., Laoufi I., Attia A., Bousahla A. A., Tounsi A., Tounsi A., et al.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.95, sa.2, ss.155-167, 2025 (SCI-Expanded, Scopus)

25. Investigation of the Effect of Changes in Material Values of FSPed Al5754 on Contact Mechanics

Sekban D. M., Aktarer S. M., Özdemir M. E., Uzun Yaylacı E., Pirim A. E., Kolahchi R., et al.

ADVANCES IN NANO RESEARCH , cilt.3, sa.5, ss.246-260, 2025 (SCI-Expanded, Scopus)

26. Fractional Thermoelastic Analysis of Infinite Porous Materials with Cylindrical Cavities and Voids Using a Modified Space-Time-Nonlocality Kernel

Abouelregal A. E., Yaylacı M., Alhashash A., Alsaeed S. S.

INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN , cilt.21, ss.1-25, 2025 (SCI-Expanded, Scopus)

27. On the thermal bending behavior of porous cross-ply laminated plates using an improved first-order shear deformation theory

Rajeh M. A., Al-Dulaijan S. U., Bourada F., Al-Osta M. A., Tounsi A., YAYLACI M., et al.

Acta Mechanica , cilt.236, sa.7, ss.4177-4195, 2025 (SCI-Expanded, Scopus)

28. Energy Harvesting Estimation from Vibration of Chopped Fiber Rod-Reinforced Microbeams with Piezoelectric Patch Based on Five Parameter-Surface-Strain Gradient Beam Model

Balubaid M., Ramady A., Mahmoud S., Kolahchi R., Keshtegar B., Ali S., et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS , cilt.25, sa.12, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

29. The dual phase lag model for thermoelastic microbeams embedded in an elastic foundation incorporating fractional Kelvin-Voigt viscoelasticity

Abouelregal A. E., Alsaeed S. S., YAYLACI M., Elzayady M. E., KURT Z., UZUN YAYLACI E.

MECHANICS OF MATERIALS , cilt.205, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

30. Fractional nonlocal couple stress waves in magneto elastic Nano beam using Homotopy Perturbation Technique

Selvamani R., Thangamuni P., Yaylacı M., Öztürk Ş., Uzun Yaylacı E.

ACTA MECHANICA , cilt.6, sa.9, ss.116-125, 2025 (SCI-Expanded, Scopus)

31. Microbial Calcite Precipitation by Marine-Derived Rhodococcus Strain RK-15: Characterization and Application in Concrete

Uzun Yaylacı E., Öztürk Ş., Kara A., Yaylacı M., Çağlak E.

GEOMICROBIOLOGY JOURNAL AN INTERNATIONAL JOURNAL OF GEOMICROBIOLOGY AND MICROBIAL BIOGEOCHEMISTRY , cilt.3, sa.4, ss.105-119, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

32. Energy harvesting capabilities and bandgaps of locally resonant piezoelectric metamaterial panels with self-extraction synchronized circuit

Furjan M., Kolahchi R., YAYLACI M.

Applied Mathematical Modelling , cilt.141, 2025 (SCI-Expanded, Scopus)

33. Evaluation of the contact problem of two layers one of functionally graded, loaded by circular rigid block and resting on a Pasternak foundation by analytical and numerical (FEM and MLP) methods

YAYLACI M., YAZICIOĞLU A., UZUN YAYLACI E., Terzi M., BİRİNCİ A.

ARCHIVE OF APPLIED MECHANICS , cilt.95, sa.4, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

34. Analysis of the Impact of the Viscoelastic Foundation on Bending and Vibration of FG Porous Nanoplates within Integral Higher-Order Shear Deformation Theory

Baghdali I., Attia A., Bourada F., Bousahla A., Tounsi A., Heireche H., et al.

Physical Mesomechanics , cilt.28, sa.2, ss.245-262, 2025 (SCI-Expanded, Scopus)

35. Free Vibration Analysis of a Functionally Graded Magneto-Piezo-Thermoelastic Ceramic-Metal Nanobeam Using Modified Nonlocal State-Space Strain Gradient Theory

Selvamani R., Rubine L., Prabhakaran T., YAYLACI M.

Physical Mesomechanics , cilt.28, sa.2, ss.263-274, 2025 (SCI-Expanded, Scopus)

36. Tri-Method Analysis of Contact Mechanics in Orthotropic-Isotropic Materials

Öner E., Oktay M. G., Uzun Yaylacı E., Yaylacı M., Mirzaoğlu İ.

ARCHIVE OF APPLIED MECHANICS , cilt.2, ss.311-320, 2025 (SCI-Expanded, Scopus)

37. Experimental research of polymer fracture under hydro-mechanical behavior

Reffas Sid A., Elmmaguenni M., Moulgada A., Zagane M. E. S., Yaylacı M., Yekhlef R., et al.

GEOMECHANICS AND ENGINEERING , sa.2, ss.678-690, 2025 (SCI-Expanded, Scopus)

38. Doublet structural modelling of nonhomogeneous Euler mass sensor nanobeams using boundary characteristics Bernstein Polynomials

Selvamani R., Prabhakaran T., Yaylacı M., Kartal Ş. E., Uzun Yaylacı E.

ZAMM ZEITSCHRIFT FÜR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.105, sa.3, ss.1-10, 2025 (SCI-Expanded, Scopus)

39. Free vibration analysis of nonlinearly dispersed FG-CNTRC beams on Kerr substrate using an improved FSDT

Gawah Q., Abdullah M. A., Al-Osta M. A., Bourada F., Tounsi A., Tounsi A., et al.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.93, sa.6, ss.475-493, 2025 (SCI-Expanded, Scopus)

40. Numerical analysis of crack nucleation in contact mechanics under fretting wear loading

Baltach A., Benhamena A., Chaouch M. I., Zagane M. E., Yaylacı M., Öztürk Ş., et al.

STRUCTURAL ENGINEERING AND MECHANICS , sa.2, ss.345-350, 2025 (SCI-Expanded, Scopus)

41. Investigating Formability Behavior of Friction Stir-Welded High-Strength Shipbuilding Steel using Experimental, Finite Element, and Artificial Neural Network Methods

SEKBAN D. M., UZUN YAYLACI E., Ozdemir M. E., YAYLACI M., Tounsi A.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.34, sa.6, ss.4942-4950, 2025 (SCI-Expanded, Scopus)

42. A new shear deformation theory for composite multilayered shells of revolution with retainment of Koiter's recommendation: Static and free vibration analyses

Long L., YAYLACI M., Lezgy-Nazargah M.

Structures , cilt.73, 2025 (SCI-Expanded, Scopus)

43. Numerical analysis of three-point bending of sandwich panels with different core cross-sections: Finite element study

Achache H., Abdi G., El Sallah Z. M., Yaylacı M., Boughedaoui R., Öztürk Ş., et al.

ADVANCES IN NANO RESEARCH , cilt.2, ss.1009-1021, 2025 (SCI-Expanded, Scopus)

44. Comparison of offshore fish cage flotation systems designs using finite element method

Özdemir M. E., Öztürk Ş., Ay S., Mirzaloğlu İ., Terzi M., Yaylacı M.

Journal of Ceramics and Composites , cilt.1, sa.1, ss.40-45, 2025 (Hakemli Dergi)

45. Biomechanical Analysis and Solution Suggestions of Screw Replacement Scenarios in Femoral Neck Fracture Surgeries: Finite Element Method

Guvercin Y., YAYLACI M., Dizdar A., Ozdemir M. E., Ay S., UZUN YAYLACI E., et al.

ORTHOPAEDIC SURGERY , cilt.17, sa.2, ss.614-623, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

46. Free vibration analysis of sandwich cylindrical shells with functionally graded carbon nanotube-reinforced composite face sheets using the differential quadrature (DQ) method

Youzera H., Meftah S. A., Tounsi A., Salem M. A., Khedher K. M., YAYLACI M.

Acta Mechanica , cilt.236, sa.2, ss.1395-1410, 2025 (SCI-Expanded, Scopus)

47. Analysis of temperature changes in living tissue using the modified fractional thermal conduction model under laser heat flux on the skin surface

Abouelregal A. E., Alharb R. A., YAYLACI M., Mohamed B. O., Megahid S. F.

CONTINUUM MECHANICS AND THERMODYNAMICS , cilt.37, sa.1, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

48. Quasi-3D plate theory for size-dependent static and free vibration analysis of FG microplate with porosities based on a modified couple stress theory

Tounsi A., Kaci A., Tounsi A., Al-Osta M. A., YAYLACI M., Mohamed S. M. Y., et al.

Mechanics of Advanced Materials and Structures , 2025 (SCI-Expanded, Scopus)

49. Nonlinear forced vibration analysis of FG-CNTRC sandwich beams with viscoelastic core under various boundary conditions

Youzera H., Meftah S. A., Tounsi A., Salem M. A., Khedher K. M., YAYLACI M.

Mechanics of Advanced Materials and Structures , 2025 (SCI-Expanded, Scopus)

50. Stenotrophomonas strain DP30; a marine bacteria capable of precipitating calcium carbonate

UZUN YAYLACI E., KARA A., AKSU İ., YAYLACI M.

GEOMICROBIOLOGY JOURNAL , cilt.42, sa.3, ss.177-182, 2025 (SCI-Expanded, Scopus)

51. Energy harvesting and forced vibration of flexoelectric hydrogel-based triboelectric spherical cap microgenerators

Furjan M., Zhou X., Shen X., Farrokhian A., Kolahchi R., YAYLACI M.

Acta Mechanica , 2025 (SCI-Expanded, Scopus)

52. Optimization flutter response of laminated smart nanocomposite truncated conical shell under supersonic aerodynamic pressure using hybrid IGWO-DQHFEM

Shan L., Furjan M., Kolahchi R., YAYLACI M.

Aerospace Science and Technology , cilt.156, 2025 (SCI-Expanded, Scopus)

53. Superharmonic resonance analysis of the sandwich FGM beams with viscoelastic core layer

Youzera H., Meftah S. A., Tounsi A., Khedher K. M., Salem M. A., YAYLACI M.

Computers and Concrete , cilt.35, sa.1, ss.71-81, 2025 (SCI-Expanded, Scopus)

54. An Improved First-Order Shear Deformation Theory for Wave Propagation Analysis in FG-CNTRC Beams Resting on a Viscoelastic Substrate

Gawah Q., Bourada F., Al-Osta M. A., Tahir S. I., Tounsi A., YAYLACI M.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS , cilt.25, sa.01, 2025 (SCI-Expanded, Scopus)

55. Analysis of the changes in microstructure, mechanical, and contact properties of multi-pass friction stir processed dp800 steel

Aktarer S. M., Küçükömeroğlu T., Sekban D. M., Uzun Yaylacı E., Yaylacı M., Zdemir M. E. O., et al.

ADVANCES IN NANO RESEARCH , cilt.18, sa.3, ss.253-264, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

56. A shear deformable numerical approaches for the static analysis of bi-directional functionally graded beams

Turan M., KAHYA V., UZUN YAYLACI E., YAYLACI M.

ADVANCES IN NANO RESEARCH , cilt.18, sa.2, ss.143-162, 2025 (SCI-Expanded, Scopus)

57. Study of the behavior of TORP middle ear prostheses of various lengths by the finite element method

Omar K., Sidi Mohamed F., Hamada A., Abderahmene S., YAYLACI M., Abdelkader B., et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

58. RFOR-DQHFEM: Hybrid relaxed first-Order reliability and differential quadrature hierarchical finite element method for multi-physics reliability analysis of conical shells

Furjan M., Kolahchi R., YAYLACI M.

THIN-WALLED STRUCTURES , cilt.205, 2024 (SCI-Expanded, Scopus)

59. Numerical fatigue damage analysis and mathematical modeling of articular cartilage under cyclic load via hyperelasticity theory

Furjan M., Cai J. X., Shan L., Shen X., YAYLACI M., Bidgoli M. R., et al.

APPLIED MATHEMATICAL MODELLING , cilt.136, 2024 (SCI-Expanded, Scopus)

60. Nonlinear vibration and parametric excitation of magneto-thermo elastic embedded nanobeam using homotopy perturbation technique

Selvamani R., Thangamuni P., YAYLACI M., Ozdemir M. E., UZUN YAYLACI E.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.104, sa.12, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

61. Accurate free and forced vibration behavior prediction of functionally graded sandwich beams with variable cross-section: A finite element assessment

Belabed Z., Tounsi A., Bousahla A. A., Tounsi A., YAYLACI M.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.52, sa.11, ss.9144-9177, 2024 (SCI-Expanded, Scopus)

62. Stability analysis of porous FG sandwich plates under thermomechanical loads via integral HySDT

Laoufi I., Attia A., Bourada F., Tounsi A., Tounsi A., Khedher K. M., et al.

ARCHIVE OF APPLIED MECHANICS , cilt.94, sa.11, ss.3175-3194, 2024 (SCI-Expanded, Scopus)

63. Evaluation of the effect on the permanent tooth germ and the adjacent teeth by finite element impact analysis in the traumatized primary tooth

Kurt A., Yaylacı M., Dizdar A., Naralan M. E., Uzun Yaylacı E., Öztürk Ş., et al.

INTERNATIONAL JOURNAL OF PAEDIATRIC DENTISTRY , cilt.34, sa.6, ss.822-831, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

64. Determination of formability behavior of steel used in ships by various methods

SEKBAN D. M., UZUN YAYLACI E., Ozdemir M. E., YAYLACI M.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.92, sa.2, ss.189-196, 2024 (SCI-Expanded, Scopus)

65. Dynamic Instability Behaviour Prediction of Curved Shell Composite Structure Using Different Higher-Order Theories

Gangwar A., Sahu A. K., Kumar V., Sharma N., YAYLACI M., Panda S. K.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES , cilt.12, sa.7, ss.8801-8814, 2024 (SCI-Expanded, Scopus)

66. Nonlinear poro-thermo-forced vibration in curved sandwich magneto-electro-elastic shells under hygrothermal environment

Selvamani R., Ebrahimi F., YAYLACI M., ÖZTÜRK Ş., UZUN YAYLACI E.

ACTA MECHANICA , cilt.235, sa.9, ss.5489-5528, 2024 (SCI-Expanded, Scopus)

67. Computational Modelling and Mechanical Characteristics of Polymeric Hybrid Composite Materials: An Extensive Review

Gangwar A., Kumar V., YAYLACI M., Panda S. K.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING , cilt.31, sa.7, ss.3901-3921, 2024 (SCI-Expanded, Scopus)

68. Formability behavior of AH-32 shipbuilding steel strengthened by friction stir process

SEKBAN D. M., UZUN YAYLACI E., Özdemir M. E., ÖZTÜRK Ş., YAYLACI M., Panda S. K.

THEORETICAL AND APPLIED FRACTURE MECHANICS , cilt.132, 2024 (SCI-Expanded, Scopus)

69. Multi-method examination of contact mechanics in orthotropic layers under gravity

Oner E., UZUN YAYLACI E., YAYLACI M.

MECHANICS OF MATERIALS , cilt.195, 2024 (SCI-Expanded, Scopus)

70. Examining the contact problem of a functionally graded layer supported by an elastic half-plane with the analytical and numerical methods

YAYLACI M., YAYLI M. Ö., ÖZTÜRK Ş., Ay S., Özdemir M. E., UZUN YAYLACI E., et al.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES , cilt.47, sa.12, ss.10400-10420, 2024 (SCI-Expanded, Scopus)

71. Impact of material distribution on the dynamic response of a bidirectional FG beam under general boundary conditions and supported by nonlinear substrate

Laoud B., Benyoucef S., Bachiri A., Bourada F., Tounsi A., Yaylacı M., et al.

ACTA MECHANICA , cilt.235, sa.7, ss.4417-4433, 2024 (SCI-Expanded, Scopus)

72. On Nonlinear Dynamic Analysis of Hyperbolic Tangent FG-GPL-Reinforced Shallow Spherical Cap under Supersonic Flow

Kolahchi R., Wei Y., Furjan M., Yaylacı M., Farrokhian A., Shen X.

WAVES IN RANDOM AND COMPLEX MEDIA , cilt.1, sa.1, ss.1-18, 2024 (SCI-Expanded, Scopus)

73. Free vibration and bending analysis of porous bi-directional FGM sandwich shell using a TSDT p-version finite element method

Lakhdar Z., Chorfi S. M., Belalia S. A., Khedher K. M., Alluqmani A. E., Tounsi A., et al.

ACTA MECHANICA , cilt.235, sa.6, ss.3657-3686, 2024 (SCI-Expanded, Scopus)

74. Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch

Abdelmadjid M., El Sallah Z. M., YAYLACI M., Djafar A. K., Ali B., Abdelghani B., et al.

STEEL AND COMPOSITE STRUCTURES , cilt.51, sa.1, ss.63-72, 2024 (SCI-Expanded, Scopus)

75. Finite element analysis of the behavior of elliptical cracks emanating from the orthopedic cement interface in total hip prostheses

Benouis A., Zagane M. E. S., Moulgada A., YAYLACI M., Kaci D., Terzi M., et al.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.89, sa.5, ss.539-547, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

76. Research of the crack problem of a functionally graded layer

YAYLACI M., UZUN YAYLACI E., Turan M., Özdemir M. E., ÖZTÜRK Ş., Ay S.

STEEL AND COMPOSITE STRUCTURES , cilt.50, sa.1, ss.77-87, 2024 (SCI-Expanded, Scopus)

77. Vibration of piezo-magneto-thermoelastic FG nanobeam submerged in fluid with variable nonlocal parameter

Rajendran S., Loganathan R., YAYLACI M., UZUN YAYLACI E., Ozdemir M. E.

ADVANCES IN NANO RESEARCH , cilt.16, sa.5, ss.489-500, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

78. Analyzing of continuous and discontinuous contact problems of a functionally graded layer: theory of elasticity and finite element method

YAYLACI M., Öner E., ADIYAMAN G., ÖZTÜRK Ş., UZUN YAYLACI E., BİRİNCİ A.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.52, sa.8, ss.5720-5738, 2024 (SCI-Expanded, Scopus)

79. Finite element analysis of ratcheting on beam under bending-bending loading conditions

Fuyad S. T. M., Al Ban A., Makfidunnabi M., Nain H. M. Z., Ozdemir M. E., YAYLACI M.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.89, sa.1, ss.23-31, 2024 (SCI-Expanded, Scopus)

80. Combined influence of variable distribution models and boundary conditions on the thermodynamic behavior of FG sandwich plates lying on various elastic foundations

Lafi D. E., Bouhadra A., Mamen B., Menasria A., Bouradab M., Bousahla A. A., et al.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.89, sa.2, ss.103-119, 2024 (SCI-Expanded, Scopus)

81. Finite element analysis of the femur fracture for a different total hip prosthesis (Charnley, Osteal, and Thompson)

Zagane M. E. S., Abdelmadjid M., YAYLACI M., Abderahmen S., UZUN YAYLACI E.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.88, sa.6, ss.583-588, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

82. Comparative study by the finite element method of three activities of a wearer of total hip prosthesis during the postoperative period

Moulgada A., El Sallah Zagane M., YAYLACI M., Djafar A. K., Abderahmane S., ÖZTÜRK Ş., et al.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.87, sa.6, ss.575-583, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

83. Numerical simulation of the total hip prosthesis under static and dynamic loading (for three activities)

El Sallah Zagane M., Moulgada A., YAYLACI M., Abderahmen S., Özdemir M. E., Yaylacı E.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.86, sa.5, ss.635-645, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

84. The contact problem of a functionally graded layer under the effect of gravity

Adıyaman G., Öner E., Yaylacı M., Birinci A.

ZAMM ZEITSCHRIFT FÜR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.1, sa.1, ss.1-19, 2023 (SCI-Expanded, Scopus)

85. Free vibration and buckling of functionally graded porous beams using analytical, finite element, and artificial neural network methods

Turan M., Yaylacı E. U., Yaylacı M.

ARCHIVE OF APPLIED MECHANICS , cilt.92, sa.13, ss.1-34, 2023 (SCI-Expanded, Scopus)

86. Biomechanical Investigation Of e E ects Of Various Treatment Options On e Talus In Supination External Rotation Type 4 Ankle Injuries With Ruptured Deltoid Ligament: Finite Element Analysis

Yaylacı M., Güvercin Y.

Sakarya Tıp Dergisi , cilt.13, sa.1, ss.62-69, 2023 (TRDizin)

87. A study on the contact problem of a layer consisting of functionally graded material (FGM) in the presence of body force

Adıyaman G., Öner E., Yaylacı M., Birinci A.

JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES , cilt.18, sa.1, ss.125-141, 2023 (SCI-Expanded, Scopus)

88. Vibration and buckling analyses of FGM beam with edge crack: Finite element and multilayer perceptron methods

YAYLACI M., Yaylacı E., Özdemir M. E., ÖZTÜRK Ş., Sesli H.

STEEL AND COMPOSITE STRUCTURES , cilt.46, sa.4, ss.565-575, 2023 (SCI-Expanded, Scopus)

89. Research of the impact of material and flow properties on fluid-structure interaction in cage systems

Özdemir M. E., Yaylacı M.

WIND AND STRUCTURES, AN INTERNATIONAL JOURNAL , cilt.36, sa.1, ss.31-40, 2023 (SCI-Expanded, Scopus)

90. Analyzing the mechano-bactericidal effect of nano-patterned surfaces by finite element method and verification with artificial neural networks

Yaylacı E., Yaylacı M., Özdemir M. E., Terzi M., Öztürk Ş.

ADVANCES IN NANO RESEARCH , cilt.15, sa.2, ss.165-174, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

91. Analysis of the mechano-bactericidal effects of nanopatterned surfaces on implant-derived bacteria using the FEM

UZUN YAYLACI E., Ozdemir M. E., Guvercin Y., ÖZTÜRK Ş., YAYLACI M.

ADVANCES IN NANO RESEARCH , cilt.15, sa.6, ss.567-577, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

92. Biomechanical analysis of odontoid and transverse atlantal ligament in humans with ponticulus posticus variation under different loading conditions: Finite element study.

Güvercin Y., Yaylacı M., Dizdar A., Kanat A., Uzun Yaylacı E., Ay S., et al.

Injury , cilt.53, ss.3879-3886, 2022 (SCI-Expanded, Scopus)

93. Implementation of finite element and artificial neural network methods to analyze the contact problem of a functionally graded layer containing crack

YAYLACI M., Yaylacı E. U., Özdemir M. E., Ay S., ÖZTÜRK Ş.

Steel and Composite Structures , cilt.45, sa.4, ss.501-511, 2022 (SCI-Expanded, Scopus)

94. Implementation of finite element and artificial neural network methods to analyze the contact problem of a functionally graded layer containing crack

YAYLACI M., UZUN YAYLACI E., Ozdemir M. E., Ay S., ÖZTÜRK Ş.

STEEL AND COMPOSITE STRUCTURES , cilt.45, sa.4, ss.501-511, 2022 (SCI-Expanded, Scopus)

95. Application of artificial neural networks in the analysis of the continuous contact problem

Yaylaci E., Oner E., YAYLACI M., Ozdemir M. E., Abushattal A., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.84, sa.1, ss.35-48, 2022 (SCI-Expanded, Scopus)

96. Suture button fixation method used in the treatment of syndesmosis injury: A biomechanical analysis of the effect of the placement of the button on the distal tibiofibular joint in the mid-stance phase with finite elements method

Guvercin Y., Abdioglu A. A., Dizdar A., Yaylaci E., YAYLACI M.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED , cilt.53, sa.7, ss.2437-2445, 2022 (SCI-Expanded, Scopus)

97. The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch

YAYLACI M., Abanoz M., Yaylaci E., ÖLMEZ H., SEKBAN D. M., BİRİNCİ A.

STEEL AND COMPOSITE STRUCTURES , cilt.43, sa.5, ss.661-672, 2022 (SCI-Expanded, Scopus)

98. Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods

YAYLACI M., Abanoz M., Yaylaci E., ÖLMEZ H., SEKBAN D. M., BİRİNCİ A.

ARCHIVE OF APPLIED MECHANICS , cilt.92, sa.6, ss.1953-1971, 2022 (SCI-Expanded, Scopus)

99. Solving the contact problem of functionally graded layers resting on a HP and pressed with a uniformly distributed load by analytical and numerical methods

YAYLACI M., Sabano B. S., Ozdemir M. E., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.82, sa.3, ss.401-416, 2022 (SCI-Expanded, Scopus)

100. Simulate of edge and an internal crack problem and estimation of stress intensity factor through finite element method

YAYLACI M.

ADVANCES IN NANO RESEARCH , cilt.12, sa.4, ss.405-414, 2022 (SCI-Expanded, Scopus)

101. On the plane receding contact between two functionally graded layers using computational, finite element and artificial neural network methods

ÖNER E., Sengul Sabano B., Uzun Yaylaci E., ADIYAMAN G., YAYLACI M., BİRİNCİ A.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.102, sa.2, 2022 (SCI-Expanded, Scopus)

102. Finite element analysis of the mechanical behavior of the different angle hip femoral stem

Guvercin Y., YAYLACI M., ÖLMEZ H., Yaylaci E., Ozdemir M. E., Dizdar A.

BIOMATERIALS AND BIOMECHANICS IN BIOENGINEERING , cilt.6, sa.1, ss.29-46, 2022 (ESCI)

103. İnsan ve Koyun Femur Kemiğinin Sonlu Elemanlar Yöntemiyle Karşılaştırılması

YAYLACI M., GÜVERCİN Y.

Journal of Anatolian Environmental and Animal Sciences , cilt.6, sa.4, ss.599-603, 2021 (TRDizin)

104. Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method and multilayer perceptron

YAYLACI M., Yayli M., Yaylaci E., ÖLMEZ H., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.78, sa.5, ss.585-597, 2021 (SCI-Expanded, Scopus)

105. Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM

YAYLACI M., ADIYAMAN G., Oner E., BİRİNCİ A.

COMPUTERS AND CONCRETE , cilt.27, sa.3, ss.199-210, 2021 (SCI-Expanded, Scopus)

106. Assessment of different solution methods for receding contact problems in functionally graded layered mediums

YAYLACI M., Eyuboglu A., ADIYAMAN G., Yaylaci E., ÖNER E., BİRİNCİ A.

MECHANICS OF MATERIALS , cilt.154, 2021 (SCI-Expanded, Scopus)

107. Investigation of The Effect of Different Prosthesis Designs and Numbers on Stress, Strain and Deformation Distribution

NİŞANCİ G. N., GÜVERCİN Y., ATEŞ S. M., ÖLMEZ H., UZUN Y. E., YAYLACI M.

International Journal of Engineering and Applied Sciences , cilt.12, sa.4, ss.138-152, 2020 (Hakemli Dergi)

108. Examination of analytical and finite element solutions regarding contact of a functionally graded layer

YAYLACI M., Adiyaman G., OEner E., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.76, sa.3, ss.325-336, 2020 (SCI-Expanded, Scopus)

109. EFFECT OF DIFFERENT ABUTMENT MATERIALS ON STRESS DISTRIBUTION IN PERIPHERAL BONE AND DENTAL IMPLANT SYSTEM

Terzi M., GÜVERCİN Y., ATEŞ S. M., SEKBAN D. M., YAYLACI M.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.38, sa.3, ss.1495-1507, 2020 (ESCI)

110. Finite element modeling of contact between an elastic layer and two elastic quarter planes

YAYLACI M., AVCAR M.

COMPUTERS AND CONCRETE , cilt.26, sa.2, ss.107-114, 2020 (SCI-Expanded, Scopus)

111. Artificial neural network calculations for a receding contact problem

Yaylaci E., Yaylaci M., ÖLMEZ H., BİRİNCİ A.

COMPUTERS AND CONCRETE , cilt.25, sa.6, ss.551-563, 2020 (SCI-Expanded, Scopus)

112. Investigation of The Effect of Different Prosthesis Designs and Numbers on Stress, Strain and Deformation Distribution

Nişancı G. N., GÜVERCİN Y., ATEŞ S. M., ÖLMEZ H., UZUN YAYLACI E., YAYLACI M.

International Journal of Engineering and Applied Sciences , cilt.12, sa.4, ss.138-152, 2020 (Hakemli Dergi)

113. Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane

Yaylaci M., TERZİ C., AVCAR M.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.72, sa.6, ss.775-783, 2019 (SCI-Expanded, Scopus)

114. Finite Element Modeling of Receding Contact Problem

YAYLACI M., BAYRAK M. Ç., AVCAR M.

International Journal of Engineering and Applied Sciences , cilt.11, ss.468-475, 2019 (Hakemli Dergi)

115. YARIM DÜZLEM ÜZERİNE OTURAN FONKSİYONEL DERECELENDİRİLMIŞ TABAKANIN DEĞME MEKANİĞİ

YAYLI M., YAYLACI M., BİRİNCİ A.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.7, sa.3, ss.639-646, 2019 (TRDizin)

116. YARIM DÜZLEM ÜZERİNE OTURAN FONKSİYONEL DERECELENDİRİLMİŞ TABAKANIN DEĞME MEKANİĞİ

YAYLI M., YAYLACI M., BIRINCI A.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.7, ss.639-646, 2019 (TRDizin)

117. Contact problems between a functionally graded layer and a rigid support

ABANOZ M., YAYLACI M., BIRINCI A.

Journal of Structural Engineering Applied Mechanics , cilt.2, ss.23-35, 2019 (Hakemli Dergi)

118. TEMAS PROBLEMLERİNDE SONLU ELEMANLAR YÖNTEMİNİN DOĞRULUĞUNUN İNCELENMESİ

YAYLACI M., TERZİ C.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.6, sa.3, ss.511-519, 2018 (TRDizin)

119. Finite Element Solution of the Contact Problem

KARABULUT P. M., YAYLACI M., BIRINCI A.

Turkish Journal of Science Technology , cilt.13, ss.113-117, 2018 (Hakemli Dergi)

120. COMPARISON BETWEEN NUMERICAL AND ANALYTICAL SOLUTIONS FOR THE RECEDING CONTACT PROBLEM

Yaylaci M.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.35, sa.2, ss.333-346, 2017 (ESCI)

121. A receding contact problem between a functionally graded layer and two homogeneous quarter planes

ADIYAMAN G., BİRİNCİ A., Oner E., Yaylaci M.

ACTA MECHANICA , cilt.227, sa.6, ss.1753-1766, 2016 (SCI-Expanded, Scopus)

122. The investigation crack problem through numerical analysis

Yaylaci M.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.57, sa.6, ss.1143-1156, 2016 (SCI-Expanded, Scopus)

123. ANALYSIS OF A LONG STRIP CONTAINING AN INTERNAL OR EDGE CRACK USING FEM

Yaylaci M., BİRİNCİ A., ADIYAMAN G., Oner E.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.34, sa.2, ss.269-278, 2016 (ESCI)

124. Analytical solution of a contact problem and comparison with the results from FEM

Oner E., Yaylaci M., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.54, sa.4, ss.607-622, 2015 (SCI-Expanded, Scopus)

125. Analytical and finite element solution of a receding contact problem

ADIYAMAN G., Yaylaci M., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.54, sa.1, ss.69-85, 2015 (SCI-Expanded, Scopus)

126. Analysis of Continuous and Discontinuous Cases of a Contact Problem Using Analytical Method and FEM

BİRİNCİ A., ADIYAMAN G., YAYLACI M., Oner E.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES , cilt.12, sa.9, ss.1771-1789, 2015 (SCI-Expanded, Scopus)

127. Comparison between Analytical and ANSYS Calculations for a Receding Contact Problem

Yaylaci M., Oner E., BİRİNCİ A.

JOURNAL OF ENGINEERING MECHANICS , cilt.140, sa.9, 2014 (SCI-Expanded, Scopus)

128. SOLUTION OF A RECEDING CONTACT PROBLEM USING AN ANALYTICAL METHOD AND A FINITE ELEMENT METHOD

Oner E., Yaylaci M., BİRİNCİ A.

JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES , cilt.9, sa.3, ss.333-345, 2014 (SCI-Expanded, Scopus)

129. The receding contact problem of two elastic layers supported by two elastic quarter planes

Yaylaci M., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.48, sa.2, ss.241-255, 2013 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 19

1. MODELING AND ANALYSIS OF REINFORCED CONCRETE BUILDINGS USING DIFFERENT TYPES OF SEISMIC ISOLATOR UNITS ACCORDING TO TBDY 2018

Öztürk Ş., Adanur S., Yaylacı M.

5th International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.600-601, (Özet Bildiri)

2. FINITE ELEMENT METHOD AND ARTIFICIAL NEURAL NETWORK BASED NUMERICAL SOLUTION OF THE CONTACT PROBLEM

YAYLACI M., UZUN YAYLACI E., ÖZDEMİR M. E.

V-International European Conference on Interdisciplinary Scientific Research, Valencia, İspanya, 28 - 29 Ocak 2022, (Özet Bildiri)

3. Finite Element Method and Artificial Neural Network Based Numerical Solution of The Contact Problem

YAYLACI M., Yaylaci E. U., ÖZDEMİR M. E.

V-International European Conference on Interdisciplinary Scientific Research, 28 - 29 Ocak 2022, (Özet Bildiri)

4. FINITE ELEMENT ANALYSIS OF CONTACT PROBLEM OF BILAYER SYSTEM RESTING ON SIMPLE SUPPORTS

ÖNER E., YAYLACI M.

INTERNATIONAL SIIRT SCIENTIFIC RESEARCH CONGRESS, Siirt, Türkiye, 05 Kasım 2021, (Tam Metin Bildiri)

5. ELASTİK YARIM DÜZLEME OTURAN VE YAYILI YÜK İLE YÜKLENEN FONKSİYONEL DERECELENDİRİLMİŞ İKİ TABAKANIN TEMAS PROBLEMİ

ŞABANO B., YAYLACI M., ADIYAMAN G., ÖNER E., BİRİNCİ A.

22. U L U S AL ME K AN İ K K ON GR E S İ, Türkiye, 06 Eylül 2021, (Tam Metin Bildiri)

6. A Finite Element Modelling for Interface Separation in Contact Problem of Functionally Graded Layer and Homogeneous Half Space

YAYLACI M., ÖNER E., ADIYAMAN G., BİRİNCİ A.

3rd International Conference on AdvancedEngineering Technologies(ICADET 2019), 19 - 21 Eylül 2019, (Tam Metin Bildiri)

Bilirkişi Raporları 2

1. Pazar 2.Asliye Hukuk Mahkemesi

USTABAŞ İ., SÜME V., YAYLACI M.

Recep Tayyip Erdoğan Üniversitesi, ss.1, Rize, 2015

2. Pazar 2.Asliye Hukuk Mahkemesi

USTABAŞ İ., SÜME V., YAYLACI M.

Recep Tayyip Erdoğan Üniversitesi, ss.1, Rize, 2015

Metrikler

Yayın

152

Yayın (WoS)

116

Yayın (Scopus)

114

Atıf (WoS)

2706

H-İndeks (WoS)

Atıf (Scopus)

1874

H-İndeks (Scopus)

Atıf (Scholar)

3262

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Sobiad)

H-İndeks (Sobiad)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler