Yayınlar & Eserler

Yayın Ağı
Makaleler 87
Tümü (87)
SCI-E, SSCI, AHCI (80)
SCI-E, SSCI, AHCI, ESCI (81)
ESCI (1)
Scopus (80)
TRDizin (3)
Diğer Yayınlar (3)

1. Ensemble machine learning digital twin for bulk and porous g-C3N4 photodetectors

Sharma M., Anand P., Negi C. M. S., Alvi P. A., SEKBAN D. M., UZUN YAYLACI E., et al.
OPTICAL MATERIALS , cilt.178, 2026 (SCI-Expanded, Scopus)

2. Spatiotemporal nonlocal photo-thermoelasticity in microstretch semiconductors with dual-phase-lag and hall current effects

Salem M. G., Abouelregal A. E., UZUN YAYLACI E., YAYLACI M.
International Communications in Heat and Mass Transfer , cilt.178, 2026 (SCI-Expanded, Scopus)

3. Creep behavior of palm fiber reinforced epoxy composites: Experimental analysis and environmental implications

Boukhlif A., Zengah S., Baltach A., Benhamena A., Djebli A., Bendouba M., et al.
Journal of Materials Research and Technology , cilt.43, ss.1683-1694, 2026 (SCI-Expanded, Scopus)

4. One-dimensional axisymmetric advanced thermoelastic diffusion modeling for cylindrical structures using modified nonlocal thermo-diffusion model including thermal and diffusion length-scale parameters

Abouelregal A. E., Alsaeed S. S., Alshammari N. F., UZUN YAYLACI E., YAYLACI M.
Applied Thermal Engineering , cilt.297, 2026 (SCI-Expanded, Scopus)

5. Dens Invaginatus as a Biomechanical Risk Modifier in Dental Trauma: Finite Element Analysis

Ayaz E. Ş., Aydınoğlu S., Günaçar D. N., Dizdar A., Uzun Yaylacı E., Yaylacı M., et al.
DENTAL TRAUMATOLOGY , 2026 (SCI-Expanded, Scopus)

6. Investigation of FGM patch repairs for cracked aluminum structures: J-integral analysis

Abdelmadjid M., Abderahmane S., El Sallah Z. M., Ahmed M., Tahar A., KURT Z., et al.
SCIENTIFIC REPORTS , cilt.16, sa.1, 2026 (SCI-Expanded, Scopus) Creative Commons License

7. Seawater-derived ureolytic Vibrio sp. strain F-11 as a microbial agent for calcium carbonate biomineralization

UZUN YAYLACI E., KARA A., GÜLPINAR SEKBAN D. Ü., YAYLACI M.
ANTONIE VAN LEEUWENHOEK INTERNATIONAL JOURNAL OF GENERAL AND MOLECULAR MICROBIOLOGY , cilt.119, sa.6, 2026 (SCI-Expanded, Scopus)

8. Preparation, Characterization, and Adsorption Performance of an Interlayer-Expanded PPy/Maghnite-Cu2+ Nanocomposite for Methylene Blue Removal

Bekhti M. A., Zahaf F., Saiah O., Baltach A., SEKBAN D. M., UZUN YAYLACI E., et al.
POLYMERS , cilt.18, sa.9, 2026 (SCI-Expanded, Scopus)

9. Dynamic behavior of graphene-origami-based meta-auxetic doublet nanobeam with memory-dependent effect

Selvamani R., Prabhakaran T., YAYLACI M., SEKBAN D. M., UZUN YAYLACI E.
ACTA MECHANICA , 2026 (SCI-Expanded, Scopus) Creative Commons License

10. Nonlocal MGT photo-thermoelasticity: Rotating magnetized semiconductor half-space under ultrafast laser excitation

Abouelregal A. E., Alsaeed S. S., Alshammari N. F., UZUN YAYLACI E., YAYLACI M.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.172, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. Effect of crack defects on stress intensity and longevity of hip prostheses: a finite element analysis

Ali B., El Sallah Z. M., Abdelmadjid M., YAYLACI M., Djafar A. K., ÖZTÜRK Ş., et al.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.97, sa.5, ss.689-705, 2026 (SCI-Expanded, Scopus)

12. Modeling transient responses in magnetized porous structures: a coupled laser-thermomagnetic stimulation study with memory-dependent effects

Abouelregal A. E., Alsaeed S. S., Alshammari N. F., UZUN YAYLACI E., YAYLACI M.
ARCHIVE OF APPLIED MECHANICS , cilt.96, sa.4, 2026 (SCI-Expanded, Scopus)

13. Micromechanical Prediction of Elastic Properties of Unidirectional Glass and Carbon Fiber-Reinforced Epoxy Composites Using the Halpin-Tsai Model

Zengah S., Slimani R., Baltach A., Taghezout A., Benhamena A., Sekban D. M., et al.
POLYMERS , cilt.18, sa.7, 2026 (SCI-Expanded, Scopus)

14. Nonlinear Dynamics and Structural Stability of Arc-Auxetic-Tapered Plates with Piezoelectric Patches for Sports Equipment Applications

Lin B., Chen L., UZUN YAYLACI E.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS , 2026 (SCI-Expanded, Scopus)

15. Nonlinear Receding Contact Mechanics of Functionally Graded Layers for Aerospace Structures: A Symmetry-Based Analytical and FEM Study

Abushattal A., Terzi M., Eyüboğlu A., YAYLACI M., SEKBAN D. M., NAYIR S., et al.
Symmetry , cilt.18, sa.2, 2026 (SCI-Expanded, Scopus)

16. A Multi-perspective Exploration of Contact Behavior in Orthotropic Layer Resting on Isotropic Half-Plane

Terzi M., ÖNER E., UZUN YAYLACI E., Oktay M. G., YAYLACI M.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING , cilt.50, sa.1, ss.253-269, 2026 (SCI-Expanded, Scopus)

17. Effect of friction stir processing on contact stresses and areas in structural steel: A numerical and ANN-based study

SEKBAN D. M., UZUN YAYLACI E., Ozdemir M. E., YAYLACI M., TURNA İ., Tounsi A.
SMART STRUCTURES AND SYSTEMS , cilt.37, sa.1, ss.1-16, 2026 (SCI-Expanded, Scopus) Creative Commons License

18. A modified thermo piezoelectric model with spatiotemporal nonlocality and phase lags for solid spherical piezoelectric bodies under dynamic thermal loading

Abouelregal A. E., Alrubea N. A., Alanazi K., UZUN YAYLACI E., YAYLACI M.
Journal of Thermal Stresses , 2026 (SCI-Expanded, Scopus)

19. Numerical analysis of tensile-shear performance in welded plate structures

Mohamed C., Moulgada A., Zagane M. E. S., YAYLACI M., Kaci D. A., Sahli A., et al.
ADVANCES IN NANO RESEARCH , cilt.20, sa.1, ss.17-31, 2026 (SCI-Expanded, Scopus)

20. Crack initiation and propagation in Ti-45Nb alloys under fretting fatigue: A 3D finite element and fracture mechanics study

Taghezout A., Zengah S., Benhamena A., Baltach A., Djebli A., El Sallah Z. M., et al.
Advances in Nano Research , cilt.20, sa.4, ss.587-605, 2026 (SCI-Expanded, Scopus)

21. Fractal nonlocal thermoelasticity of porous mass sensor nanobeam with Klein-Gordon nonlocality subjected to blast load

Selvamani R., Prabhakaran T., Yaylacı M., Öztürk O. B., Uzun Yaylacı E.
CASE STUDIES IN THERMAL ENGINEERING , cilt.77, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

22. Experimental comparison of heat transfer from a rectangular fin array and a circular tube bundle under free and forced convection

Khelil F., Benaoum F., Baltach A., Taieb N., Kholkhal K., Belarbi A., et al.
HEAT AND MASS TRANSFER , cilt.62, sa.2, 2026 (SCI-Expanded, Scopus)

23. Fractional DPL Thermoelasticity With Rabotnov Kernel in a Rotating Stressed Medium With Spherical Cavity

Abouelregal A. E., Alsaeed S. S., UZUN YAYLACI E., YAYLACI M.
MATHEMATICAL METHODS IN THE APPLIED SCIENCES , cilt.48, sa.18, ss.16375-16390, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

24. Evaluation of prostheses retained zygomatic and dental implants in large defects in the maxilla due to tumors or major trauma by biomechanical 3-dimensional finite element analysis

Yemenoglu H., Beder M., Yaylacı M., Dizdar A., Alkurt M., Naralan M. E., et al.
BMC ORAL HEALTH , cilt.25, sa.1, 2025 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma

25. Biomechanical evaluation of a lower-limb implant model under gait and stumbling conditions using finite element analysis

Nawel G., Abderahmane S., Abdelmadjid M., El Sallah Z. M., YAYLACI M., ÖZTÜRK Ş., et al.
SCIENTIFIC REPORTS , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)

26. The Behavior of Beams Reinforced with Patches Under Three-Point Bending: An Experimental Investigation

Benaoum F., Khelil F., Baltach A., GÜLPINAR SEKBAN D. Ü., UZUN YAYLACI E., Benhamena A., et al.
POLYMERS , cilt.17, sa.22, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

27. Microbial Calcite Precipitation by Marine-Derived Rhodococcus Strain RK-15: Characterization and Application in Concrete

UZUN YAYLACI E., ÖZTÜRK Ş., KARA A., YAYLACI M., ÇAĞLAK E.
GEOMICROBIOLOGY JOURNAL , cilt.42, sa.9, ss.745-752, 2025 (SCI-Expanded, Scopus)

28. Investigation of the effect of composite patch repair on the life of a plate with two lateral cracks

Abdelmadjid M., Sallah Z. M. E., Djafar A. K., Abderahmane S., YAYLACI M., Mirzaloglu I., et al.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.96, sa.2, ss.131-138, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

29. Fractional nonlocal couple stress waves in magnetoelastic nanobeam using homotopy perturbation technique

Selvamani R., Prabhakaran T., YAYLACI M., ÖZTÜRK Ş., UZUN YAYLACI E.
ACTA MECHANICA , cilt.236, sa.9, ss.5477-5494, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

30. Comparative study by FEM of different liners of a transfemoral amputated lower limb

Cherif A. A., Abdelmadjid M., El Sallah Z. M., Ali B., YAYLACI M., Abderahmane S., et al.
SCIENTIFIC REPORTS , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus)

31. Analysis of the contact problem functionally graded layer placed on a Pasternak foundation

YAZICIOĞLU A., YAYLACI M., SEKBAN D. M., KULEYİN H., UZUN YAYLACI E., BİRİNCİ A., et al.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.105, sa.8, 2025 (SCI-Expanded, Scopus)

32. Investigation of the effect of changes in material values of FSPed Al5754 on contact mechanics

Sekban D. M., Aktarer S. M., Ozdemir M. E., Uzun Yaylacı E., Pirim A. E., Kolahchi R., et al.
ADVANCES IN NANO RESEARCH , cilt.19, sa.2, ss.117-127, 2025 (SCI-Expanded, Scopus)

33. The dual phase lag model for thermoelastic microbeams embedded in an elastic foundation incorporating fractional Kelvin-Voigt viscoelasticity

Abouelregal A. E., Alsaeed S. S., YAYLACI M., Elzayady M. E., KURT Z., UZUN YAYLACI E.
MECHANICS OF MATERIALS , cilt.205, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

34. Tri-method analysis of contact mechanics in orthotropic-isotropic materials

ÖNER E., Oktay M. G., UZUN YAYLACI E., YAYLACI M., Mirzaloglu I.
ARCHIVE OF APPLIED MECHANICS , cilt.95, sa.5, 2025 (SCI-Expanded, Scopus) Creative Commons License

35. Numerical analysis of three-point bending of sandwich panels with different core cross-sections: Finite element study

Achache H., Abdi G., El Sallah Z. M., YAYLACI M., Boughedaoui R., ÖZTÜRK Ş., et al.
ADVANCES IN NANO RESEARCH , cilt.18, sa.5, ss.481-488, 2025 (SCI-Expanded, Scopus)

36. Experimental research of polymer fracture under hydro-mechanical behavior

Reffas S. A., Elmeguenni M., Zagane M. S., Moulgada A., YAYLACI M., Yekhlef R., et al.
GEOMECHANICS AND ENGINEERING , cilt.41, sa.3, ss.337-349, 2025 (SCI-Expanded, Scopus)

37. Numerical analysis of crack nucleation in contact mechanics under fretting wear loading

Baltach A., Benhamena A., Chaouch M. I., Zagane M. E., YAYLACI M., ÖZTÜRK Ş., et al.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.94, sa.3, ss.231-238, 2025 (SCI-Expanded, Scopus)

38. Evaluation of the contact problem of two layers one of functionally graded, loaded by circular rigid block and resting on a Pasternak foundation by analytical and numerical (FEM and MLP) methods

YAYLACI M., YAZICIOĞLU A., UZUN YAYLACI E., Terzi M., BİRİNCİ A.
ARCHIVE OF APPLIED MECHANICS , cilt.95, sa.4, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

39. Doublet structural modeling of nonhomogeneous Euler mass sensor nanobeams using boundary characteristics Bernstein Polynomials

Selvamani R., Prabhakaran T., Yaylacı M., Kartal Ş. E., Uzun Yaylacı E.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.105, sa.3, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

40. Investigating Formability Behavior of Friction Stir-Welded High-Strength Shipbuilding Steel using Experimental, Finite Element, and Artificial Neural Network Methods

SEKBAN D. M., UZUN YAYLACI E., Ozdemir M. E., YAYLACI M., Tounsi A.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.34, sa.6, ss.4942-4950, 2025 (SCI-Expanded, Scopus)

41. Biomechanical Analysis and Solution Suggestions of Screw Replacement Scenarios in Femoral Neck Fracture Surgeries: Finite Element Method

Guvercin Y., YAYLACI M., Dizdar A., Ozdemir M. E., Ay S., UZUN YAYLACI E., et al.
ORTHOPAEDIC SURGERY , cilt.17, sa.2, ss.614-623, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

42. Analysis of the changes in microstructure, mechanical, and contact properties of multi-pass friction stir processed dp800 steel

Aktarer S. M., Küçükömeroğlu T., Sekban D. M., Uzun Yaylacı E., Yaylacı M., Zdemir M. E. O., et al.
ADVANCES IN NANO RESEARCH , cilt.18, sa.3, ss.253-264, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

43. Stenotrophomonas strain DP30; a marine bacteria capable of precipitating calcium carbonate

UZUN YAYLACI E., KARA A., AKSU İ., YAYLACI M.
GEOMICROBIOLOGY JOURNAL , cilt.42, sa.3, ss.177-182, 2025 (SCI-Expanded, Scopus)

44. A shear deformable numerical approaches for the static analysis of bi-directional functionally graded beams

Turan M., KAHYA V., UZUN YAYLACI E., YAYLACI M.
ADVANCES IN NANO RESEARCH , cilt.18, sa.2, ss.143-162, 2025 (SCI-Expanded, Scopus)

45. Nonlinear vibration and parametric excitation of magneto-thermo elastic embedded nanobeam using homotopy perturbation technique

Selvamani R., Thangamuni P., YAYLACI M., Ozdemir M. E., UZUN YAYLACI E.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.104, sa.12, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

46. Application of artificial neural network for the mechano-bactericidal effect of bioinspired nanopatterned surfaces

UZUN YAYLACI E.
EUROPEAN BIOPHYSICS JOURNAL WITH BIOPHYSICS LETTERS , cilt.53, sa.7-8, ss.415-427, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

47. Evaluation of the effect on the permanent tooth germ and the adjacent teeth by finite element impact analysis in the traumatized primary tooth

Kurt A., Yaylacı M., Dizdar A., Naralan M. E., Uzun Yaylacı E., Öztürk Ş., et al.
INTERNATIONAL JOURNAL OF PAEDIATRIC DENTISTRY , cilt.34, sa.6, ss.822-831, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

48. Determination of formability behavior of steel used in ships by various methods

SEKBAN D. M., UZUN YAYLACI E., Ozdemir M. E., YAYLACI M.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.92, sa.2, ss.189-196, 2024 (SCI-Expanded, Scopus)

49. Nonlinear poro-thermo-forced vibration in curved sandwich magneto-electro-elastic shells under hygrothermal environment

Selvamani R., Ebrahimi F., YAYLACI M., ÖZTÜRK Ş., UZUN YAYLACI E.
ACTA MECHANICA , cilt.235, sa.9, ss.5489-5528, 2024 (SCI-Expanded, Scopus)

50. Multi-method examination of contact mechanics in orthotropic layers under gravity

Oner E., UZUN YAYLACI E., YAYLACI M.
MECHANICS OF MATERIALS , cilt.195, 2024 (SCI-Expanded, Scopus)

51. Examining the contact problem of a functionally graded layer supported by an elastic half-plane with the analytical and numerical methods

YAYLACI M., YAYLI M. Ö., ÖZTÜRK Ş., Ay S., Özdemir M. E., UZUN YAYLACI E., et al.
MATHEMATICAL METHODS IN THE APPLIED SCIENCES , cilt.47, sa.12, ss.10400-10420, 2024 (SCI-Expanded, Scopus)

52. Formability behavior of AH-32 shipbuilding steel strengthened by friction stir process

SEKBAN D. M., UZUN YAYLACI E., Özdemir M. E., ÖZTÜRK Ş., YAYLACI M., Panda S. K.
THEORETICAL AND APPLIED FRACTURE MECHANICS , cilt.132, 2024 (SCI-Expanded, Scopus)

53. Response Surface Methodology for Optimization of Antagonist Effect of Bacillus sp.

Uzun Yaylacı E.
Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.5, sa.1, ss.126-132, 2024 (Hakemli Dergi)

54. Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch

Abdelmadjid M., El Sallah Z. M., YAYLACI M., Djafar A. K., Ali B., Abdelghani B., et al.
STEEL AND COMPOSITE STRUCTURES , cilt.51, sa.1, ss.63-72, 2024 (SCI-Expanded, Scopus)

55. Finite element analysis of the behavior of elliptical cracks emanating from the orthopedic cement interface in total hip prostheses

Benouis A., Zagane M. E. S., Moulgada A., YAYLACI M., Kaci D., Terzi M., et al.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.89, sa.5, ss.539-547, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

56. Research of the crack problem of a functionally graded layer

YAYLACI M., UZUN YAYLACI E., Turan M., Özdemir M. E., ÖZTÜRK Ş., Ay S.
STEEL AND COMPOSITE STRUCTURES , cilt.50, sa.1, ss.77-87, 2024 (SCI-Expanded, Scopus)

57. Analyzing of continuous and discontinuous contact problems of a functionally graded layer: theory of elasticity and finite element method

YAYLACI M., Öner E., ADIYAMAN G., ÖZTÜRK Ş., UZUN YAYLACI E., BİRİNCİ A.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.52, sa.8, ss.5720-5738, 2024 (SCI-Expanded, Scopus)

58. Vibration of piezo-magneto-thermoelastic FG nanobeam submerged in fluid with variable nonlocal parameter

Rajendran S., Loganathan R., YAYLACI M., UZUN YAYLACI E., Ozdemir M. E.
ADVANCES IN NANO RESEARCH , cilt.16, sa.5, ss.489-500, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

59. Finite element analysis of the femur fracture for a different total hip prosthesis (Charnley, Osteal, and Thompson)

Zagane M. E. S., Abdelmadjid M., YAYLACI M., Abderahmen S., UZUN YAYLACI E.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.88, sa.6, ss.583-588, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

60. Comparative study by the finite element method of three activities of a wearer of total hip prosthesis during the postoperative period

Moulgada A., El Sallah Zagane M., YAYLACI M., Djafar A. K., Abderahmane S., ÖZTÜRK Ş., et al.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.87, sa.6, ss.575-583, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

61. Numerical simulation of the total hip prosthesis under static and dynamic loading (for three activities)

El Sallah Zagane M., Moulgada A., YAYLACI M., Abderahmen S., Özdemir M. E., Yaylacı E.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.86, sa.5, ss.635-645, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

62. Free vibration and buckling of functionally graded porous beams using analytical, finite element, and artificial neural network methods

Turan M., Uzun Yaylaci E., Yaylacı M.
ARCHIVE OF APPLIED MECHANICS , cilt.93, sa.4, ss.1351-1372, 2023 (SCI-Expanded, Scopus)

63. Vibration and buckling analyses of FGM beam with edge crack: Finite element and multilayer perceptron methods

YAYLACI M., Yaylacı E., Özdemir M. E., ÖZTÜRK Ş., Sesli H.
STEEL AND COMPOSITE STRUCTURES , cilt.46, sa.4, ss.565-575, 2023 (SCI-Expanded, Scopus)

64. Analysis of the mechano-bactericidal effects of nanopatterned surfaces on implant-derived bacteria using the FEM

UZUN YAYLACI E., Ozdemir M. E., Guvercin Y., ÖZTÜRK Ş., YAYLACI M.
ADVANCES IN NANO RESEARCH , cilt.15, sa.6, ss.567-577, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

65. Analyzing the mechano-bactericidal effect of nano-patterned surfaces by finite element method and verification with artificial neural networks

Yaylacı E., Yaylacı M., Özdemir M. E., Terzi M., Öztürk Ş.
ADVANCES IN NANO RESEARCH , cilt.15, sa.2, ss.165-174, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

66. Biomechanical analysis of odontoid and transverse atlantal ligament in humans with ponticulus posticus variation under different loading conditions: Finite element study.

Güvercin Y., Yaylacı M., Dizdar A., Kanat A., Uzun Yaylacı E., Ay S., et al.
Injury , cilt.53, ss.3879-3886, 2022 (SCI-Expanded, Scopus)

67. Implementation of finite element and artificial neural network methods to analyze the contact problem of a functionally graded layer containing crack

YAYLACI M., UZUN YAYLACI E., Ozdemir M. E., Ay S., ÖZTÜRK Ş.
STEEL AND COMPOSITE STRUCTURES , cilt.45, sa.4, ss.501-511, 2022 (SCI-Expanded, Scopus)

68. Characterization of Pseudoalteromonas sp. from Aquaculture Environment and Optimization of Fermentation Culture Parameters by RSM-Based Modeling

Yaylaci E.
TURKISH JOURNAL OF FISHERIES AND AQUATIC SCIENCES , cilt.22, sa.11, 2022 (SCI-Expanded, Scopus)

69. Application of artificial neural networks in the analysis of the continuous contact problem

Yaylaci E., Oner E., YAYLACI M., Ozdemir M. E., Abushattal A., BİRİNCİ A.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.84, sa.1, ss.35-48, 2022 (SCI-Expanded, Scopus)

70. Antibacterial Activity and In vitro Probiotic Properties of Lactococcus lactis Isolated from Sea Bass (Dicentrarchus labrax)

UZUN YAYLACI E.
JOURNAL OF ANATOLIAN ENVIRONMENTAL AND ANIMAL SCIENCES , cilt.7, sa.3, ss.251-256, 2022 (TRDizin)

71. Suture button fixation method used in the treatment of syndesmosis injury: A biomechanical analysis of the effect of the placement of the button on the distal tibiofibular joint in the mid-stance phase with finite elements method

Guvercin Y., Abdioglu A. A., Dizdar A., Yaylaci E., YAYLACI M.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED , cilt.53, sa.7, ss.2437-2445, 2022 (SCI-Expanded, Scopus)

72. Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods

YAYLACI M., Abanoz M., Yaylaci E., ÖLMEZ H., SEKBAN D. M., BİRİNCİ A.
ARCHIVE OF APPLIED MECHANICS , cilt.92, sa.6, ss.1953-1971, 2022 (SCI-Expanded, Scopus)

73. The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch

YAYLACI M., Abanoz M., Yaylaci E., ÖLMEZ H., SEKBAN D. M., BİRİNCİ A.
STEEL AND COMPOSITE STRUCTURES , cilt.43, sa.5, ss.661-672, 2022 (SCI-Expanded, Scopus)

74. On the plane receding contact between two functionally graded layers using computational, finite element and artificial neural network methods

ÖNER E., Sengul Sabano B., Uzun Yaylaci E., ADIYAMAN G., YAYLACI M., BİRİNCİ A.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.102, sa.2, 2022 (SCI-Expanded, Scopus)

75. Finite element analysis of the mechanical behavior of the different angle hip femoral stem

Guvercin Y., YAYLACI M., ÖLMEZ H., Yaylaci E., Ozdemir M. E., Dizdar A.
BIOMATERIALS AND BIOMECHANICS IN BIOENGINEERING , cilt.6, sa.1, ss.29-46, 2022 (ESCI)

76. Isolation and characterization of Bacillus spp. from aquaculture cage water and its inhibitory effect against selected Vibrio spp.

Yaylaci E.
ARCHIVES OF MICROBIOLOGY , cilt.204, sa.1, 2022 (SCI-Expanded, Scopus)

77. Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method and multilayer perceptron

YAYLACI M., Yayli M., Yaylaci E., ÖLMEZ H., BİRİNCİ A.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.78, sa.5, ss.585-597, 2021 (SCI-Expanded, Scopus)

78. Assessment of different solution methods for receding contact problems in functionally graded layered mediums

YAYLACI M., Eyuboglu A., ADIYAMAN G., Yaylaci E., ÖNER E., BİRİNCİ A.
MECHANICS OF MATERIALS , cilt.154, 2021 (SCI-Expanded, Scopus)

79. Application of Artificial Neural Networks to Predict Inhibition in Probiotic Experiments

UZUN YAYLACI E.
International Journal of Engineering and Applied Sciences , cilt.13, sa.3, ss.106-125, 2021 (Hakemli Dergi)

80. Antioxidant Potential of Chestnut Shell, Stinging Nettle, Kiwi Fruit and Citrus Fruit Extracts and Antimicrobial Effects Against Some Fish Pathogens

Kobya O., Kara B., Yaylacı E., Çağlak E.
JOURNAL OF ANATOLIAN ENVIRONMENTAL AND ANIMAL SCIENCES , cilt.12, sa.4, ss.138-152, 2021 (TRDizin) Sürdürülebilir Kalkınma

81. Antibacterial Effects of Boric Acid Against Aquatic Pathogens

UZUN YAYLACI E.
JOURNAL OF ANATOLIAN ENVIRONMENTAL AND ANIMAL SCIENCES , cilt.6, sa.2, ss.240-244, 2021 (TRDizin) Sürdürülebilir Kalkınma

82. Highly Transferable pAQU-Related Plasmids Encoding Multidrug Resistance Are Widespread in the Human and Fish Pathogen Photobacterium damselae subsp. damselae in Aquaculture Areas in the Black Sea

Vences A., Abushattal S., Matanza X. M., Dubert J., Uzun E., Ogut H., et al.
MICROBIAL ECOLOGY , cilt.80, sa.3, ss.507-518, 2020 (SCI-Expanded, Scopus)

83. Artificial neural network calculations for a receding contact problem

Yaylaci E., Yaylaci M., ÖLMEZ H., BİRİNCİ A.
COMPUTERS AND CONCRETE , cilt.25, sa.6, ss.551-563, 2020 (SCI-Expanded, Scopus)

84. Investigation of The Effect of Different Prosthesis Designs and Numbers on Stress, Strain and Deformation Distribution

Nişancı G. N., GÜVERCİN Y., ATEŞ S. M., ÖLMEZ H., UZUN YAYLACI E., YAYLACI M.
International Journal of Engineering and Applied Sciences , cilt.12, sa.4, ss.138-152, 2020 (Hakemli Dergi)

85. The isolation frequency of bacterial pathogens from sea bass (Dicentrarchus labrax) in the Southeastern Black Sea

Uzun E., Ogut H.
AQUACULTURE , cilt.437, ss.30-37, 2015 (SCI-Expanded, Scopus)

86. TRACE ELEMENTS IN WHITING MERLANGIUS MERLANGUS AND ITS PARASITE HYSTEROTHYLACIUM ADUNCUM: ROLE OF AGE, SIZE AND PARASITISM ON THE HOST

ALKAN N., Alkan A., Uzun E., Ogut H.
APPLIED ECOLOGY AND ENVIRONMENTAL RESEARCH , cilt.13, sa.3, ss.741-752, 2015 (SCI-Expanded, Scopus) Creative Commons License

87. Incidence and prevalence of Diplectanum aequans and its influence on the fitness of juvenile sea bass (Dicentrarchus labrax) in the Black Sea

Ogut H., Uzun E.
AQUACULTURE RESEARCH , cilt.45, sa.4, ss.742-748, 2014 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 14

1. EVALUATION OF MARINE-DERIVED BACTERIA FOR BIOCONCRETE APPLICATIONS

Uzun Yaylacı E.
6th INTERNATIONAL ANKARA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Ankara, Türkiye, 8 - 09 Ağustos 2026, ss.11, (Özet Bildiri)

2. MICROBIALLY INDUCED CALCIUM CARBONATE PRECIPITATION POTENTIAL OF SPHINGOBACTERIUM SP.

Uzun Yaylacı E., Kara A.
7th International Uludağ Scientific Research Congress, Bursa, Türkiye, 03 Ekim 2025, ss.3-4, (Özet Bildiri)

3. The behavior of Pseudoalteromonas haloplanktis OS-9 in Conditions that Mimic the Gastrointestinal Environment of Fish

UZUN YAYLACI E.
4th International Conference on Scientific Research, Şanlıurfa, Türkiye, 9 - 11 Eylül 2022, (Özet Bildiri)

4. Antibacterial Activity of Marine-Culturable Rhodococcus Species Collected from Aquaculture Cage Surface Waters

UZUN YAYLACI E.
9th International Academic Studies Conference, Türkiye, 3 - 05 Ağustos 2022, (Özet Bildiri)

5. In vitro analysis: Antibacterial Potential of Marine Psychrobacter sp.,

UZUN YAYLACI E.
8th International Mardin Artuklu Scientific Researchers Conference, Mardin, Türkiye, 4 - 06 Haziran 2022, (Özet Bildiri)

6. FINITE ELEMENT METHOD AND ARTIFICIAL NEURAL NETWORK BASED NUMERICAL SOLUTION OF THE CONTACT PROBLEM

YAYLACI M., UZUN YAYLACI E., ÖZDEMİR M. E.
V-International European Conference on Interdisciplinary Scientific Research, Valencia, İspanya, 28 - 29 Ocak 2022, (Özet Bildiri)

7. Antibacterial Activity of Helichrysum arenarium subsp. aucheri Extract Against Vibrio spp. Isolated from Sea Bass (Dicentrarchus labrax) and Aquaculture Cage Water

UZUN YAYLACI E., CÜCE M., BEKİRCAN T.
7th International Mardin Artuklu Scientific Researchers Conference, Mardin, Türkiye, 10 - 12 Aralık 2021, (Özet Bildiri)

8. Levrekten (Dicentrarchus labrax) İzole Edilen Lactococcus lactis'in Antibakteriyel Potansiyelinin İncelenmesi

UZUN YAYLACI E.
10th Ulusal Moleküler Biyoloji ve Biyoteknoloji Kongresi, Türkiye, 17 - 19 Aralık 2021, (Özet Bildiri)

9. In vitro Antimicrobial Activity of Rosa canina Leaf Extract Against Selected Microorganisms

UZUN YAYLACI E., CÜCE M., BEKİRCAN T.
4th Agriculture, Environment and Health Congress, Aydın, Türkiye, 20 - 22 Mayıs 2021, (Özet Bildiri)

10. Preliminary Selection Study of Potential Probiotic Bacteria from Aquaculture Environment

UZUN YAYLACI E.
4th Agriculture, Environment and Health Congress, Aydın, Türkiye, 20 - 22 Mayıs 2021, (Özet Bildiri)

11. Antibacterial Activity of Orange (Citrus aurantium) and Stinging Nettle (Urtica dioica) Extracts Against Selected Fish Pathogenic Bacteria

Kobya O., KARA B., UZUN YAYLACI E., ÇAĞLAK E.
2nd International Symposium on Biodiversity Research, Rize, Türkiye, 18 - 20 Kasım 2020, (Özet Bildiri)

12. Bacterial Differentiation with Artificial Neural Networks

UZUN YAYLACI E., ÖĞÜT H.
Eurosian Congress on Molecular Biotechnology, 19 - 21 Eylül 2019, (Özet Bildiri)

13. DOĞU KARADENİZDE DENİZ LEVREĞİ DİCENTRARCHUS LABRAX NDE ÖLÜMLERE SEBEP OLAN BAKTERİYEL PATOJENLER VE İNDİANSLARI

ÖĞÜT H., UZUN YAYLACI E.
18. ULUSAL SU SEMPOZYUMU, Türkiye, 1 - 04 Eylül 2015, ss.179, (Özet Bildiri)

14. KARADENİZDE YETİŞTİRİCİLİĞİ YAPILAN LEVREK BALIKLARINA DİCENTRARCHUS LABRAX DİPLECTANUM AEQUANS PARAZİTİNİN İNSİDANS VE PREVELENSİNİN ETKİSİ

ÖĞÜT H., UZUN YAYLACI E.
18. ULUSAL SU SEMPOZYUMU, Türkiye, 1 - 04 Eylül 2015, ss.334, (Özet Bildiri)
Metrikler

Yayın

101

Yayın (WoS)

81

Yayın (Scopus)

80

Atıf (WoS)

2135

H-İndeks (WoS)

28

Atıf (Scopus)

2100

H-İndeks (Scopus)

29

Atıf (Scholar)

2400

H-İndeks (Scholar)

29

Proje

10

Açık Erişim

5
BM Sürdürülebilir Kalkınma Amaçları
SDG 3: AMAÇ 3: SAĞLIKLI BİREYLER
SDG 9: AMAÇ 9: SANAYİ, YENİLİKÇİLİK VE ALTYAPI
SDG 11: AMAÇ 11: SÜRDÜRÜLEBİLİR ŞEHİR VE YAŞAM ALANLARI
SDG 14: AMAÇ 14: SUDAKİ YAŞAM